Pelco DVR5100 manual Cameras Setup, Basic Camera Setup

Page 43

CAMERAS SETUP

You can configure cameras, alarms, video, and motion settings from the Cameras screen. Configuration changes to an analog camera can be made, even if it is not connected. If an IP camera is not connected, its corresponding channel number appears with a red slash across it and the text in the right hand panel is not available; no changes can be made.

The DVR5100 accommodates fixed cameras that transmit NTSC/PAL signals and positioning systems that use Pelco standard protocols. When selecting a protocol for a PTZ camera, consider whether or not you require bidirectional communication between cameras and the DVR.

Pelco D protocol supports bidirectional communication, which allows the DVR5100 and cameras to communicate with each other. This is useful if you want to:

Log the occurrence of alarm events about the camera in the system log.

Obtain positioning information about the camera, such as its elevation or azimuth.

Review additional information, such as the camera’s current magnification (refer to Figure 41).

Extended Coaxitron should be used to get similar information without connecting additional wiring. Refer to Table U on page 71, Table V on page 72, and Table W on page 72 for more information on camera and video settings and defaults.

BASIC CAMERA SETUP

Figure 41. General Cameras Screen

To set up a camera:

1.Select a camera from the list using the mouse [or joystick and jog (inner dial)]. If you change settings for a device, and then select a different device before you save the changes, a message appears prompting you to save the changes you have made or cancel the action. Select OK to save the changes or Cancel to retain the original settings.

Figure 42. Saving Changes to Cameras

C1695M-B (11/08)

43

Image 43
Contents DVR5100 Series Hybrid Video Recorder Contents Appendix a System Settings Descriptions and Defaults List of Illustrations Users Screen List of Tables Video Quality Caution Regulatory NoticesAbout the DVR5100 Before You BeginQty Description NEW Product FeaturesParts List New Feature DescriptionPackage Contents Extra Product Serial Number Label Product Serial Number Label PlacementRack Mounting Hardware InstallationEquipment Placement and Rack Mounting Desktop MountingInserting Cage Nuts Mounting the DVR5100 into the Rack Tightening the Thumbscrews Video Inputs AC Power ConnectorConnections Audio Inputs 1C1695M-B 11/08 Connecting a USB PC Keyboard and Mouse Connecting Devices to the DVR5100Connecting Video Input Connecting IP Cameras Connecting a DVR5100 in a Network ConfigurationCable Type Maximum Distance Connecting PAN/TILT/ZOOM Positioning Systems Connecting Analog CamerasPin Lead Looping Video OUT Connecting AudioConnector Tip Signal highNormally Closed Connecting Relay DevicesRelay Pin Label Lead Normally OpenConnecting a Relay Device Connecting AlarmsConnecting Power Connecting a Sequence MonitorPin Label Lead Turning On the DVR5100 Changing the Monitor ConfigurationLogging on for the First Time User ID PasswordMain Application Window Shutting Down the DVR5100Logging OFF Video Pane Border DVR5100 Controls and MenusRed Function Button Blue Function ButtonYellow Function Button Green Function ButtonMenu Plus +/Minus buttons Enter/Shift Joystick USB PC KEYBOARD/MOUSE and Control PAD FunctionsKeyboard Control Pad Function Playback mode Speed settingSetting Inner dial to adjust the volumeBlue function button + Up/down Backspace Shuttle outer ringThrough the letters in the field Minus to decrease the valueON-SCREEN Menus Displaying and Hiding the System MenusControl PAD Navigating to and Selecting a Menu ItemEntering Characters USB PC Keyboard and MouseHelp Menu Showing Online Help and System InformationSystem Information HelpContext Sensitive Help System Setup Basic DVR5100 ConfigurationConfigure General Settings Date and Time Setup Network Setup Ddns Screen Ddns SetupSerial Port Setup Display Screen To select the primary monitor format Display SetupBasic Camera Setup Cameras SetupIP Camera Setup Cameras Video Screen Video SetupControl panel Motion Detection SetupMouse Motion Alarms SetupRecording Schedule Screen RecordingCreating a Recording Schedule Deleting a Recording ScheduleCopying and Reusing Schedules Copying and Reusing a Recording ScheduleModifying a Recording Schedule Global Settings Storage SetupNtsc Resolutions PAL Resolutions Camera SettingsEndurastor Settings Privacy SettingsAlarms Screen Alarms SetupUnsupervised Alarms Supervised AlarmsSetting Alarm Polarity Setting UP or Renaming AlarmsSelecting AN Alarm Input Operating Mode Selecting Alarm Severity LevelModifying Relay Settings Relays SetupSequence Monitor Setup Adding and Deleting Users Users SetupModifying a User Name Viewing User PermissionsTo view user permissions Select a user from the list Configuring Alarm Notification Changing a User PasswordTo select an export or snapshot format LOG Entry Logs SetupLOG Search Search Results Dialog Box Resolution SpecificationsEnduraStor Rates PTZ Protocols Pelco D, Pelco P, and Coaxitron Alarm InputsAudio Outputs PTZ InterfaceRU per unit MountingIP Camera models Pelco IP110 Space GB Power CablesUsed for configuration and operation IP Camera Hard Drive ModelSetting Description Default Setting Appendix a System Settings Descriptions and DefaultsMaximum VPN Sessions 5 sessions DefaultSetting Description ModeSetting Description Options Disable camera Table T. Display SettingsPane. By default, overscan is set to 10% Table U. General Camera SettingsZone Settings Table V. Video SettingsInstantaneous phase of the active video subcarrier Contrast Video signal Table W. Motion SettingsCamera Table X. Recording Schedule SettingsDays Resolution Est. alarm videoEnabled Table Z. Alarms SettingsDisplayed in the Alarm name text box Normal state, causing the unit to trigger an alarmSelect relay Table AA. Relay SettingsDefined period Table AB. Sequence Monitor Settings 1 Default dwell timeExport and view all of the setup screens Table AB. Sequence Monitor Settings 2Role Administrator, Manager, Operator, and Guest All options in the setup screens User paneDefault, entries are deleted from the log after 30 days Allows you to customize how each user responds to an alarmAlarm notification Feature is disabled by defaultData Appendix B Front Panel IndicatorsHard Disk Drive Indicator Configuration/Reset Key Reserved for future useProduct Warranty and Return Information
Related manuals
Manual 2 pages 52.51 Kb Manual 8 pages 28.86 Kb Manual 2 pages 62.75 Kb Manual 62 pages 13.88 Kb Manual 120 pages 22.94 Kb Manual 1 pages 41.96 Kb

DVR5100 specifications

The Pelco DVR5100 is a versatile digital video recorder designed for security and surveillance applications. As part of Pelco's robust lineup of video management equipment, the DVR5100 offers a variety of features and technologies that make it an excellent choice for both commercial and residential environments.

One of the main attractions of the Pelco DVR5100 is its ability to capture and store high-quality video from multiple cameras. It supports various resolutions, ensuring that users can achieve optimal image clarity. The device typically accommodates up to 16 camera inputs, making it ideal for large-scale monitoring needs.

A notable feature of the DVR5100 is its advanced compression technology. By using H.264 encoding, the DVR can efficiently reduce the file size of recorded video without compromising on quality. This means that users can store more footage for extended periods without needing to upgrade their storage capacity frequently. The DVR also supports simultaneous recording and playback, allowing users to monitor live feeds while reviewing previous recordings.

Remote accessibility is another key characteristic of the DVR5100. Thanks to its integrated network functionality, users can access the system from anywhere with an internet connection. This capability is invaluable for security personnel or business owners who need to keep an eye on their premises while away. The device is compatible with various mobile applications, facilitating real-time monitoring directly from smartphones or tablets.

Additionally, the DVR5100 features customizable recording settings. Users can choose from various recording modes – continuous, scheduled, or event-triggered – to best suit their surveillance needs. The inclusion of motion detection technology further enhances its functionality, allowing the system to capture footage only when activity is detected, thus conserving storage space and reducing the clutter of non-critical recordings.

The user interface of the DVR5100 is designed with simplicity in mind, offering intuitive navigation through its menus and settings. This ease of use is complemented by comprehensive search features, enabling quick retrieval of recorded videos based on time, date, or event type.

In summary, the Pelco DVR5100 is a robust digital video recorder that excels in providing high-quality surveillance capabilities, advanced compression technologies, and user-friendly features. Whether for a small business or a large security operation, the DVR5100 stands out as an efficient and reliable solution for comprehensive video management and monitoring needs.