Pelco DVR5100 manual Video Setup, Cameras Video Screen

Page 45

2. If the desired IP camera is disabled, click Add/Edit Addresses (refer to Figure 44).

Figure 44. IP Address Dialog Box

3.Perform one of the following actions:

•To add an IP address, type the IP address of the camera you wish to address, and then click Add.

•To edit an IP address, click Edit, type the modified IP address, and then click Edit.

•To delete an IP address, select the IP address to be deleted, and then click Add.

4.Click Close to close the dialog box. The most recently added or modified address is selected by default.

5.Click Initialize to complete the setup. To disable the IP address, click Uninitialize.

NOTE: When you type the IP camera address or select an IP camera from the list of available IP cameras, the "Disabled camera" check box is cleared and the IP camera is enabled.

VIDEO SETUP

Occasionally, you may want to manually adjust the brightness, saturation, hue, and contrast settings. Use the sliders on the Video screen to modify the settings.

There are three options available for setting the noise filter: Low (default), Medium, and High. This filter removes high frequency noise from the camera to improve the quality of the encoded video signal.

Figure 45. Cameras Video Screen

C1695M-B (11/08)

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents DVR5100 Series Hybrid Video Recorder Contents Appendix a System Settings Descriptions and Defaults List of Illustrations Users Screen List of Tables Video Quality Caution Regulatory NoticesAbout the DVR5100 Before You BeginParts List NEW Product FeaturesNew Feature Description Qty DescriptionPackage Contents Extra Product Serial Number Label Product Serial Number Label PlacementEquipment Placement and Rack Mounting Hardware InstallationDesktop Mounting Rack MountingInserting Cage Nuts Mounting the DVR5100 into the Rack Tightening the Thumbscrews Connections AC Power ConnectorAudio Inputs 1 Video InputsC1695M-B 11/08 Connecting Devices to the DVR5100 Connecting a USB PC Keyboard and MouseConnecting Video Input Connecting a DVR5100 in a Network Configuration Connecting IP CamerasCable Type Maximum Distance Connecting Analog Cameras Connecting PAN/TILT/ZOOM Positioning SystemsPin Lead Connector Tip Connecting AudioSignal high Looping Video OUTRelay Pin Label Lead Connecting Relay DevicesNormally Open Normally ClosedConnecting a Relay Device Connecting AlarmsConnecting a Sequence Monitor Connecting PowerPin Label Lead Changing the Monitor Configuration Turning On the DVR5100Logging on for the First Time Main Application Window PasswordShutting Down the DVR5100 User IDLogging OFF Video Pane Border DVR5100 Controls and MenusYellow Function Button Blue Function ButtonGreen Function Button Red Function ButtonUSB PC KEYBOARD/MOUSE and Control PAD Functions Menu Plus +/Minus buttons Enter/Shift JoystickKeyboard Control Pad Function Setting Speed settingInner dial to adjust the volume Playback modeThrough the letters in the field Up/down Backspace Shuttle outer ringMinus to decrease the value Blue function button +ON-SCREEN Menus Displaying and Hiding the System MenusEntering Characters Navigating to and Selecting a Menu ItemUSB PC Keyboard and Mouse Control PADHelp Menu Showing Online Help and System InformationHelp System InformationContext Sensitive Help Basic DVR5100 Configuration System SetupConfigure General Settings Date and Time Setup Network Setup Ddns Screen Ddns SetupSerial Port Setup Display Screen To select the primary monitor format Display SetupBasic Camera Setup Cameras SetupIP Camera Setup Cameras Video Screen Video SetupControl panel Motion Detection SetupMouse Motion Alarms SetupRecording Schedule Screen RecordingCreating a Recording Schedule Deleting a Recording ScheduleCopying and Reusing Schedules Copying and Reusing a Recording ScheduleModifying a Recording Schedule Global Settings Storage SetupEndurastor Settings Camera SettingsPrivacy Settings Ntsc Resolutions PAL ResolutionsAlarms Screen Alarms SetupUnsupervised Alarms Supervised AlarmsSelecting AN Alarm Input Operating Mode Setting UP or Renaming AlarmsSelecting Alarm Severity Level Setting Alarm PolarityModifying Relay Settings Relays SetupSequence Monitor Setup Adding and Deleting Users Users SetupViewing User Permissions Modifying a User NameTo view user permissions Select a user from the list Changing a User Password Configuring Alarm NotificationTo select an export or snapshot format Logs Setup LOG EntryLOG Search Search Results Dialog Box Specifications ResolutionEnduraStor Rates Audio Outputs Alarm InputsPTZ Interface PTZ Protocols Pelco D, Pelco P, and CoaxitronMounting RU per unitIP Camera models Pelco IP110 Used for configuration and operation Power CablesIP Camera Hard Drive Model Space GBSetting Description Default Setting Appendix a System Settings Descriptions and DefaultsSetting Description DefaultMode Maximum VPN Sessions 5 sessionsSetting Description Options Pane. By default, overscan is set to 10% Table T. Display SettingsTable U. General Camera Settings Disable cameraInstantaneous phase of the active video subcarrier Contrast Table V. Video SettingsVideo signal Table W. Motion Settings Zone SettingsDays Resolution Table X. Recording Schedule SettingsEst. alarm video CameraDisplayed in the Alarm name text box Table Z. Alarms SettingsNormal state, causing the unit to trigger an alarm EnabledDefined period Table AB. Sequence Monitor Settings 1 Table AA. Relay SettingsDefault dwell time Select relayRole Administrator, Manager, Operator, and Guest Table AB. Sequence Monitor Settings 2All options in the setup screens User pane Export and view all of the setup screensAlarm notification Allows you to customize how each user responds to an alarmFeature is disabled by default Default, entries are deleted from the log after 30 daysHard Disk Drive Indicator Appendix B Front Panel IndicatorsConfiguration/Reset Key Reserved for future use DataProduct Warranty and Return Information
Related manuals
Manual 2 pages 52.51 Kb Manual 8 pages 28.86 Kb Manual 2 pages 62.75 Kb Manual 62 pages 13.88 Kb Manual 120 pages 22.94 Kb Manual 1 pages 41.96 Kb

DVR5100 specifications

The Pelco DVR5100 is a versatile digital video recorder designed for security and surveillance applications. As part of Pelco's robust lineup of video management equipment, the DVR5100 offers a variety of features and technologies that make it an excellent choice for both commercial and residential environments.

One of the main attractions of the Pelco DVR5100 is its ability to capture and store high-quality video from multiple cameras. It supports various resolutions, ensuring that users can achieve optimal image clarity. The device typically accommodates up to 16 camera inputs, making it ideal for large-scale monitoring needs.

A notable feature of the DVR5100 is its advanced compression technology. By using H.264 encoding, the DVR can efficiently reduce the file size of recorded video without compromising on quality. This means that users can store more footage for extended periods without needing to upgrade their storage capacity frequently. The DVR also supports simultaneous recording and playback, allowing users to monitor live feeds while reviewing previous recordings.

Remote accessibility is another key characteristic of the DVR5100. Thanks to its integrated network functionality, users can access the system from anywhere with an internet connection. This capability is invaluable for security personnel or business owners who need to keep an eye on their premises while away. The device is compatible with various mobile applications, facilitating real-time monitoring directly from smartphones or tablets.

Additionally, the DVR5100 features customizable recording settings. Users can choose from various recording modes – continuous, scheduled, or event-triggered – to best suit their surveillance needs. The inclusion of motion detection technology further enhances its functionality, allowing the system to capture footage only when activity is detected, thus conserving storage space and reducing the clutter of non-critical recordings.

The user interface of the DVR5100 is designed with simplicity in mind, offering intuitive navigation through its menus and settings. This ease of use is complemented by comprehensive search features, enabling quick retrieval of recorded videos based on time, date, or event type.

In summary, the Pelco DVR5100 is a robust digital video recorder that excels in providing high-quality surveillance capabilities, advanced compression technologies, and user-friendly features. Whether for a small business or a large security operation, the DVR5100 stands out as an efficient and reliable solution for comprehensive video management and monitoring needs.
Top Page Image Contents