Pelco DVR5100 manual Motion Detection Setup, Control panel

Page 46

MOTION DETECTION SETUP

The DVR5100 allows you to select three different zones per camera for the built-in video motion detection. Each zone can be enabled and configured independently. Each zone allows an unlimited number of areas to be designated as corresponding to the parameters of that zone. When setting up each zone, select “Activate zone” to enable video motion detection in that zone (refer to Figure 46).

Figure 46. Cameras Motion Screen

To set up motion detection:

1.Select the Motion tab. If necessary, select the Motion Detection Settings tab.

2.Select the camera to be configured from the camera list.

3.Select the zone you want to configure.

4.Select Activate Zone (disabled by default). This selection starts the motion detection service and activates the 24-hour motion recording schedule. Activate Zone allows you to show or hide the pixel changes in live view, trigger a motion-based recording schedule, and receive motion alarm notifications.

5.Draw the motion detection area:

Mouse: Click and drag the mouse to draw the desired area for motion detection. The currently selected zone button is surrounded by a pale square border, and the corresponding zone color is applied to the zone.

[Control panel:

•Use the joystick to enter the preview pane, and then press Enter/Shift.

•Move the joystick up, down, right, or left to move to form the desired zone.

•Press Plus or Minus to add or remove a block from the motion detection zone. Press these buttons repeatedly without moving to another block to increase or decrease the size.

•Press Enter/Shift after the zone is completed.]

6.Set the sensitivity level and threshold for the zone. The threshold is measured by the number of blocks in the frame.

7.Select Preview Motion. The Preview Motion command allows you to conduct a walk test to ensure that the sensitivity and threshold settings are appropriate for the scene.

8.Select Undo to revert back to the original settings

9.Select Clear to delete all of the defined motion detection zones.

46

C1695M-B (11/08)

Page 45 Page 47
Image 46
Page 45 Page 47
Contents DVR5100 Series Hybrid Video Recorder Contents Appendix a System Settings Descriptions and Defaults List of Illustrations Users Screen List of Tables Regulatory Notices Video Quality CautionBefore You Begin About the DVR5100New Feature Description NEW Product FeaturesParts List Qty DescriptionPackage Contents Product Serial Number Label Placement Extra Product Serial Number LabelDesktop Mounting Hardware InstallationEquipment Placement and Rack Mounting Rack MountingInserting Cage Nuts Mounting the DVR5100 into the Rack Tightening the Thumbscrews Audio Inputs 1 AC Power ConnectorConnections Video InputsC1695M-B 11/08 Connecting a USB PC Keyboard and Mouse Connecting Devices to the DVR5100Connecting Video Input Connecting IP Cameras Connecting a DVR5100 in a Network ConfigurationCable Type Maximum Distance Connecting PAN/TILT/ZOOM Positioning Systems Connecting Analog CamerasPin Lead Signal high Connecting AudioConnector Tip Looping Video OUTNormally Open Connecting Relay DevicesRelay Pin Label Lead Normally ClosedConnecting Alarms Connecting a Relay DeviceConnecting Power Connecting a Sequence MonitorPin Label Lead Turning On the DVR5100 Changing the Monitor ConfigurationLogging on for the First Time Shutting Down the DVR5100 PasswordMain Application Window User IDLogging OFF DVR5100 Controls and Menus Video Pane BorderGreen Function Button Blue Function ButtonYellow Function Button Red Function ButtonMenu Plus +/Minus buttons Enter/Shift Joystick USB PC KEYBOARD/MOUSE and Control PAD FunctionsKeyboard Control Pad Function Inner dial to adjust the volume Speed settingSetting Playback modeMinus to decrease the value Up/down Backspace Shuttle outer ringThrough the letters in the field Blue function button +Displaying and Hiding the System Menus ON-SCREEN MenusUSB PC Keyboard and Mouse Navigating to and Selecting a Menu ItemEntering Characters Control PADShowing Online Help and System Information Help MenuSystem Information HelpContext Sensitive Help System Setup Basic DVR5100 ConfigurationConfigure General Settings Date and Time Setup Network Setup Ddns Setup Ddns ScreenSerial Port Setup Display Setup Display Screen To select the primary monitor formatCameras Setup Basic Camera SetupIP Camera Setup Video Setup Cameras Video ScreenMotion Detection Setup Control panelMotion Alarms Setup MouseRecording Recording Schedule ScreenDeleting a Recording Schedule Creating a Recording ScheduleCopying and Reusing a Recording Schedule Copying and Reusing SchedulesModifying a Recording Schedule Storage Setup Global SettingsPrivacy Settings Camera SettingsEndurastor Settings Ntsc Resolutions PAL ResolutionsAlarms Setup Alarms ScreenSupervised Alarms Unsupervised AlarmsSelecting Alarm Severity Level Setting UP or Renaming AlarmsSelecting AN Alarm Input Operating Mode Setting Alarm PolarityRelays Setup Modifying Relay SettingsSequence Monitor Setup Users Setup Adding and Deleting UsersModifying a User Name Viewing User PermissionsTo view user permissions Select a user from the list Configuring Alarm Notification Changing a User PasswordTo select an export or snapshot format LOG Entry Logs SetupLOG Search Search Results Dialog Box Resolution SpecificationsEnduraStor Rates PTZ Interface Alarm InputsAudio Outputs PTZ Protocols Pelco D, Pelco P, and CoaxitronRU per unit MountingIP Camera models Pelco IP110 IP Camera Hard Drive Model Power CablesUsed for configuration and operation Space GBAppendix a System Settings Descriptions and Defaults Setting Description Default SettingMode DefaultSetting Description Maximum VPN Sessions 5 sessionsSetting Description Options Table U. General Camera Settings Table T. Display SettingsPane. By default, overscan is set to 10% Disable cameraVideo signal Table W. Motion Settings Table V. Video SettingsInstantaneous phase of the active video subcarrier Contrast Zone SettingsEst. alarm video Table X. Recording Schedule SettingsDays Resolution CameraNormal state, causing the unit to trigger an alarm Table Z. Alarms SettingsDisplayed in the Alarm name text box EnabledDefault dwell time Table AA. Relay SettingsDefined period Table AB. Sequence Monitor Settings 1 Select relayAll options in the setup screens User pane Table AB. Sequence Monitor Settings 2Role Administrator, Manager, Operator, and Guest Export and view all of the setup screensFeature is disabled by default Allows you to customize how each user responds to an alarmAlarm notification Default, entries are deleted from the log after 30 daysConfiguration/Reset Key Reserved for future use Appendix B Front Panel IndicatorsHard Disk Drive Indicator DataProduct Warranty and Return Information
Related manuals
Manual 2 pages 52.51 Kb Manual 8 pages 28.86 Kb Manual 2 pages 62.75 Kb Manual 62 pages 13.88 Kb Manual 120 pages 22.94 Kb Manual 1 pages 41.96 Kb

DVR5100 specifications

The Pelco DVR5100 is a versatile digital video recorder designed for security and surveillance applications. As part of Pelco's robust lineup of video management equipment, the DVR5100 offers a variety of features and technologies that make it an excellent choice for both commercial and residential environments.

One of the main attractions of the Pelco DVR5100 is its ability to capture and store high-quality video from multiple cameras. It supports various resolutions, ensuring that users can achieve optimal image clarity. The device typically accommodates up to 16 camera inputs, making it ideal for large-scale monitoring needs.

A notable feature of the DVR5100 is its advanced compression technology. By using H.264 encoding, the DVR can efficiently reduce the file size of recorded video without compromising on quality. This means that users can store more footage for extended periods without needing to upgrade their storage capacity frequently. The DVR also supports simultaneous recording and playback, allowing users to monitor live feeds while reviewing previous recordings.

Remote accessibility is another key characteristic of the DVR5100. Thanks to its integrated network functionality, users can access the system from anywhere with an internet connection. This capability is invaluable for security personnel or business owners who need to keep an eye on their premises while away. The device is compatible with various mobile applications, facilitating real-time monitoring directly from smartphones or tablets.

Additionally, the DVR5100 features customizable recording settings. Users can choose from various recording modes – continuous, scheduled, or event-triggered – to best suit their surveillance needs. The inclusion of motion detection technology further enhances its functionality, allowing the system to capture footage only when activity is detected, thus conserving storage space and reducing the clutter of non-critical recordings.

The user interface of the DVR5100 is designed with simplicity in mind, offering intuitive navigation through its menus and settings. This ease of use is complemented by comprehensive search features, enabling quick retrieval of recorded videos based on time, date, or event type.

In summary, the Pelco DVR5100 is a robust digital video recorder that excels in providing high-quality surveillance capabilities, advanced compression technologies, and user-friendly features. Whether for a small business or a large security operation, the DVR5100 stands out as an efficient and reliable solution for comprehensive video management and monitoring needs.
Top Page Image Contents