Pelco DVR5100 Table V. Video Settings, Brightness, Auto or Manual, Black on the monitor, Low

Page 72

Table V. Video Settings

Setting

Description

Default Setting

 

 

 

Brightness

The brightness information in a picture is conveyed by the corresponding DC level of the active

 

video. The Brightness control should be adjusted so that black picture content displays as true

Auto

(Auto or Manual)

black on the monitor.

 

 

 

 

 

 

 

The intensity of colors in the active picture. The degree by which the eye perceives a color as

 

Saturation

departing from a gray or white scale of the same brightness. A 100 percent saturated color

Auto

(Auto or Manual)

does not contain any white. Adding white reduces saturation. The color saturation in a picture

 

 

is conveyed by the corresponding amplitude of the active video subcarrier.

 

 

 

 

Hue

A characteristic that distinguishes one color from another by defining a color based on its

 

position on the spectrum. The hue information in a picture is conveyed by the corresponding

Auto

(Auto or Manual)

instantaneous phase of the active video subcarrier.

 

 

 

 

 

 

Contrast

The difference between the darkest and brightest parts of an image. Once brightness is set

Auto

(Auto or Manual)

correctly, contrast should be set comfortable viewing brightness.

 

 

 

 

 

There are three options available for setting the noise filter: Low (default), Medium, and High.

 

Noise Filter

This filter removes high frequency noise from the camera to improve the quality of the encoded

Low

 

video signal.

 

 

 

 

 

Table W. Motion Settings

 

 

 

 

Setting

Description

Default Setting

 

 

 

 

Defines a maximum of three overlapping zones in the video pane to detect motion. You can set

N/A

 

a different sensitivity level and threshold for each zone.

 

 

 

• Sensitivity: Determines the amount of motion required within an individual block to trigger

50

 

motion detection. Valid values are 1–100 (less sensitive to very sensitive). Pelco recommends

 

values of 80–99.

 

 

• Threshold: Determines the number of blocks that must detect motion to trigger the alarm.

50 of 60 blocks

Zone Settings

• Show motion in live mode: Provides a preview of your motion settings results.

Disabled

 

• Undo: Reverts any changes back to the original settings.

N/A

 

• Clear: Deletes all defined motion detection zones.

N/A

 

• Preview Motion: Allows you to conduct a walk test to ensure that the sensitivity and

N/A

 

threshold settings are appropriate for the scene.

 

 

 

• Activate zone: Determines if alarms are triggered by motion in the defined zone.

Disabled

 

 

 

 

• Severity: Broadcasts when motion is detected in a zone. Severity levels include Minor (the

Minor

 

default setting), Normal, Major, or Critical. This determines which users receive notification

 

of the alarm.

 

Alarm Settings

• Pre-alarm:Sets the length of pre-alarm video that you want to record.

0

 

 

 

• Post-alarm:Duration of the recording after the alarm has been received.

0

 

• Comments: Comments logged in the system log.

No default setting

 

• Apply to all Cameras: Resets all cameras to optional settings.

NA

 

 

 

72

C1695M-B (11/08)

Page 71 Page 73
Image 72
Page 71 Page 73
Contents DVR5100 Series Hybrid Video Recorder Contents Appendix a System Settings Descriptions and Defaults List of Illustrations Users Screen List of Tables Regulatory Notices Video Quality CautionBefore You Begin About the DVR5100NEW Product Features Parts ListNew Feature Description Qty DescriptionPackage Contents Product Serial Number Label Placement Extra Product Serial Number LabelHardware Installation Equipment Placement and Rack MountingDesktop Mounting Rack MountingInserting Cage Nuts Mounting the DVR5100 into the Rack Tightening the Thumbscrews AC Power Connector ConnectionsAudio Inputs 1 Video InputsC1695M-B 11/08 Connecting Devices to the DVR5100 Connecting a USB PC Keyboard and MouseConnecting Video Input Connecting a DVR5100 in a Network Configuration Connecting IP CamerasCable Type Maximum Distance Connecting Analog Cameras Connecting PAN/TILT/ZOOM Positioning SystemsPin Lead Connecting Audio Connector TipSignal high Looping Video OUTConnecting Relay Devices Relay Pin Label LeadNormally Open Normally ClosedConnecting Alarms Connecting a Relay DeviceConnecting a Sequence Monitor Connecting PowerPin Label Lead Changing the Monitor Configuration Turning On the DVR5100Logging on for the First Time Password Main Application WindowShutting Down the DVR5100 User IDLogging OFF DVR5100 Controls and Menus Video Pane BorderBlue Function Button Yellow Function ButtonGreen Function Button Red Function ButtonUSB PC KEYBOARD/MOUSE and Control PAD Functions Menu Plus +/Minus buttons Enter/Shift JoystickKeyboard Control Pad Function Speed setting SettingInner dial to adjust the volume Playback modeUp/down Backspace Shuttle outer ring Through the letters in the fieldMinus to decrease the value Blue function button +Displaying and Hiding the System Menus ON-SCREEN MenusNavigating to and Selecting a Menu Item Entering CharactersUSB PC Keyboard and Mouse Control PADShowing Online Help and System Information Help MenuHelp System InformationContext Sensitive Help Basic DVR5100 Configuration System SetupConfigure General Settings Date and Time Setup Network Setup Ddns Setup Ddns ScreenSerial Port Setup Display Setup Display Screen To select the primary monitor formatCameras Setup Basic Camera SetupIP Camera Setup Video Setup Cameras Video ScreenMotion Detection Setup Control panelMotion Alarms Setup MouseRecording Recording Schedule ScreenDeleting a Recording Schedule Creating a Recording ScheduleCopying and Reusing a Recording Schedule Copying and Reusing SchedulesModifying a Recording Schedule Storage Setup Global SettingsCamera Settings Endurastor SettingsPrivacy Settings Ntsc Resolutions PAL ResolutionsAlarms Setup Alarms ScreenSupervised Alarms Unsupervised AlarmsSetting UP or Renaming Alarms Selecting AN Alarm Input Operating ModeSelecting Alarm Severity Level Setting Alarm PolarityRelays Setup Modifying Relay SettingsSequence Monitor Setup Users Setup Adding and Deleting UsersViewing User Permissions Modifying a User NameTo view user permissions Select a user from the list Changing a User Password Configuring Alarm NotificationTo select an export or snapshot format Logs Setup LOG EntryLOG Search Search Results Dialog Box Specifications ResolutionEnduraStor Rates Alarm Inputs Audio OutputsPTZ Interface PTZ Protocols Pelco D, Pelco P, and CoaxitronMounting RU per unitIP Camera models Pelco IP110 Power Cables Used for configuration and operationIP Camera Hard Drive Model Space GBAppendix a System Settings Descriptions and Defaults Setting Description Default SettingDefault Setting DescriptionMode Maximum VPN Sessions 5 sessionsSetting Description Options Table T. Display Settings Pane. By default, overscan is set to 10%Table U. General Camera Settings Disable cameraTable V. Video Settings Instantaneous phase of the active video subcarrier ContrastVideo signal Table W. Motion Settings Zone SettingsTable X. Recording Schedule Settings Days ResolutionEst. alarm video CameraTable Z. Alarms Settings Displayed in the Alarm name text boxNormal state, causing the unit to trigger an alarm EnabledTable AA. Relay Settings Defined period Table AB. Sequence Monitor Settings 1Default dwell time Select relayTable AB. Sequence Monitor Settings 2 Role Administrator, Manager, Operator, and GuestAll options in the setup screens User pane Export and view all of the setup screensAllows you to customize how each user responds to an alarm Alarm notificationFeature is disabled by default Default, entries are deleted from the log after 30 daysAppendix B Front Panel Indicators Hard Disk Drive IndicatorConfiguration/Reset Key Reserved for future use DataProduct Warranty and Return Information
Related manuals
Manual 2 pages 52.51 Kb Manual 8 pages 28.86 Kb Manual 2 pages 62.75 Kb Manual 62 pages 13.88 Kb Manual 120 pages 22.94 Kb Manual 1 pages 41.96 Kb

DVR5100 specifications

The Pelco DVR5100 is a versatile digital video recorder designed for security and surveillance applications. As part of Pelco's robust lineup of video management equipment, the DVR5100 offers a variety of features and technologies that make it an excellent choice for both commercial and residential environments.

One of the main attractions of the Pelco DVR5100 is its ability to capture and store high-quality video from multiple cameras. It supports various resolutions, ensuring that users can achieve optimal image clarity. The device typically accommodates up to 16 camera inputs, making it ideal for large-scale monitoring needs.

A notable feature of the DVR5100 is its advanced compression technology. By using H.264 encoding, the DVR can efficiently reduce the file size of recorded video without compromising on quality. This means that users can store more footage for extended periods without needing to upgrade their storage capacity frequently. The DVR also supports simultaneous recording and playback, allowing users to monitor live feeds while reviewing previous recordings.

Remote accessibility is another key characteristic of the DVR5100. Thanks to its integrated network functionality, users can access the system from anywhere with an internet connection. This capability is invaluable for security personnel or business owners who need to keep an eye on their premises while away. The device is compatible with various mobile applications, facilitating real-time monitoring directly from smartphones or tablets.

Additionally, the DVR5100 features customizable recording settings. Users can choose from various recording modes – continuous, scheduled, or event-triggered – to best suit their surveillance needs. The inclusion of motion detection technology further enhances its functionality, allowing the system to capture footage only when activity is detected, thus conserving storage space and reducing the clutter of non-critical recordings.

The user interface of the DVR5100 is designed with simplicity in mind, offering intuitive navigation through its menus and settings. This ease of use is complemented by comprehensive search features, enabling quick retrieval of recorded videos based on time, date, or event type.

In summary, the Pelco DVR5100 is a robust digital video recorder that excels in providing high-quality surveillance capabilities, advanced compression technologies, and user-friendly features. Whether for a small business or a large security operation, the DVR5100 stands out as an efficient and reliable solution for comprehensive video management and monitoring needs.
Top Page Image Contents