Yamaha CRW2200SX manual Configuring for the Operating System, For Windows NT

Page 27

Setup Procedures

Configuring for the Operating System

Windows Users

1When the computer’s operating system is loading, the SCSI card will be recognized and you will be prompted to install the drivers for it. Follow the on-screen instructions and choose to reboot the computer at the end of the driver installation procedure.

Note

For details about installing the drivers for the SCSI card, refer to the documentation that came with it. Also refer to the documentation that came with your computer’s operating system.

2After the computer’s operating system (Windows 95/98/98 Second Edition/Me) has loaded, open “Control Panel” and double-click on the “System” icon. Select the “Device Manager” tab and double-click on “CDROM.” If the drive has been correctly installed, it should be listed as shown below. Similarly, double-click on “SCSI controllers” and the SCSI card should be listed as shown below if it has been properly installed.

* This is a screen shown in the Windows Me environment.

For Windows NT

You can verify by opening “Control Panel,” double-clicking on “SCSI Adapter” and clicking on the “Devices” tab.

For Windows 2000 Professional

You can verify by opening “Control Panel,” double-clicking on “System,” selecting the “Hardware” tab, and clicking on the “Device Manager” button in “System Properties.”

Notes

•For details about how to use the operating system, refer to the documentation that came with it.

•If there is an or mark, etc., next to the icon for the CRW2200SX drive or the SCSI card, this means that it has not been installed correctly.

18

Image 27

Contents Page FCC Information U.S.A Achtung English Safety Precautions Iii Have the device serviced regularly Precautions for Transportation About CD-R/RW discsCopyrights Table of Contents Introduction Features of the CRW2200SX DriveCD Text support Yamaha Buffer Underrun Protection Buffer Underrun DefinedComputer Before UseSystem Requirements Windows UsersMacintosh Users CD Writing SoftwareHard Drive Space High Speed CD-RW discs*3 Supported DiscsCD-R discs*1 CD-RW discs*2About Partial CAV Constant Angular Velocity About CD-ROMsSerial No Serial NumberFront Panel Front and Rear of UnitRear Panel Setup Flowchart Setup ProceduresSet Up the CRW2200SX Drive Scsi Settings➀ Scsi ID Number ➁ Termination Connecting the CRW2200SX Drive About Scsi cable Electrical plugs/sockets vary according to country/region Connecting the AC AdapterLED Turn on the CRW2200SX drive first, then the computerFor Windows NT Configuring for the Operating SystemSetup Procedures Check that the CRW2200SX drive is recognized correctly Install the CD Writing SoftwareOperation Loading a DiscEjecting a Disc Operation Ejecting a Disc in an EmergencyComputer does not start up TroubleshootingYamaha CD-R/RW Drive web site Drive does not turn onDisc tray does not open Drive does not operate correctly Disc keeps being ejectedNo sound of CD-DA audio CD disc is audible Properties setting of the CRW2200SX driveBuffer Underrun error message is displayed Setting of the Windows Media PlayerTrack-at-Once TAO AppendixWriting Modes Disc-at-Once DAOPacket Writing Session-at-Once SAOAbout the Firmware Determining the Firmware Version of the CRW2200SX DriveFor Windows 95/98/98 Second Edition/Me Status Indicator Messages LED Color LED Indicator MessagesSupported Formats CRW2200SX SpecificationsMB/sec. max, asynchronous AC adapter CRW2200SX series complies with the following specificationsIndex DC-IN connectorYamaha CD-R/RW Drive web site Russia EUROPE, Eastern Europe