Yamaha RX-V692 RX-V592 owner manual Bass, Treble

Page 19

1POWER switch

Press this switch to switch the power on. Press it again to switch the power off.

2Standby mode indicator

(Except U.S.A. and Canada models)

While the power is on, pressing the SYSTEM POWER OFF key on the remote control transmitter switches the unit to the standby mode. In this mode, this indicator is illuminated.

3Remote control sensor

Receives signals from the remote control transmitter.

4Display panel

Shows various information. (Refer to page 18–19 for details.)

5Input selector buttons

Select a program source to listen to or watch. When a button is pressed, the name of selected source appears on the display.

6DSP program selector buttons

Select a DSP program. When a button is pressed, the name of selected program lights up on the display.

72CH/6CH selector button

When the TV/DBS or DVD/LD input source is selected, pressing this button switches the input signals between 2 channel stereo signals and 6 channel discrete signals. When switched to “6CH”, discrete signals from the unit connected to the 6CH DISCRETE INPUT DVD/LD TV/DBS terminals of this unit are selected as the input signals.

8EFFECT button

Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder).

9VOLUME control

Used to raise or lower the volume level.

0PHONES jack

When you listen with headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through headphones.

When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT button.

PHONES

ASPEAKERS switches

Set the switch A or B (or both A and B) for the main speaker system (connected to this unit) you will use to the ON position. Set the switch for the main speaker system you will not use to the OFF position.

BA/B/C/D/E button

Press this button to select a desired group (A–E) of preset stations.

CBASS EXTENSION switch

When this switch is pressed inward (ON), boosts bass frequency response at the main left and main right channels while maintaining overall tonal balance. If you do not have a subwoofer, the use of this switch will be effective to reinforce the bass frequencies.

DTONE BYPASS switch RX-V692 only

When this switch is pressed inward (ON), the input signal does not pass through the tone control circuitry so that it is unaffected by the tone control circuitry. Use this switch to obtain pure sound and to check the tone control setting. Press this switch to release it outward (OFF) to use the tone control circuitry.

EPreset station number selector buttons Select a preset station number (1 to 8).

FTone controls

These controls are effective only for the sound from the main speakers.

BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

GBALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

HFM/AM buttons

Press this button to switch the reception band to FM or AM.

IMEMORY (MAN’L/AUTO FM) button

When this button is pressed, the MEMORY indicator flashes for about 5 seconds. During this period, select a desired preset station number by pressing the corresponding preset station number selector button to enter the displayed station into the memory.

When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (Refer to page 28 for details.)

JEDIT button

This button is used to exchange the places of two preset stations with each other.

English

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RX-V692 RX-V592 Safety Instructions Important Notice do not Modify this Unit We Want You Listening For a Lifetime for US customers onlyFCC Information for US customers only For US customers onlyContents Speaker Configuration FeaturesFor Canadian Customers Battery replacement Dolby Pro Logic Surround + DSP Profile of this UnitDigital Sound Field Processing Dolby Pro Logic SurroundSpeaker Configuration Speaker SetupSpeaker Configuration Speaker PlacementA. model ConnectionsConnections with Other Components Output GND Video Audio OUT Video OUTGND terminal For turntable use AC* Outlets Switched6CH Discrete Output Connecting with a Dolby Digital AC-3 DecoderRX-V692 only Left Main speakers B Connecting SpeakersHow to Connect Remote Control IN, OUT terminalsCenter Output terminal Impedance Selector switchRear Surround Output terminals Main Output terminalsAM loop Connecting the AM loop antennaAntenna Connections GND terminalRX-V692 Controls and Their FunctionsTreble BassCenter Mode button Tuning DOWN/UP buttonVideo AUX terminals Stereo indicator Memory indicatorAuto Tuning indicator Tape Monitor indicatorSet to the OFF Speaker Balance AdjustmentFor 4 speaker configuration For 5 speaker configurationAdjust its level Basic Operations To turn off the powerProvided for RX-V692 only To Record a Source to Tape or MD Selecting the Speaker system Adjusting the Balance controlAdjusting the Bass and Treble controls Using the Tone Bypass switchTuning off Tuning OperationsSelect the reception band FM or AM confirming it on Manual Preset Tuning Preset TuningTo store stations Automatic Preset TuningWhen the automatic preset tuning is finished To recall a preset stationExample Exchanging Preset StationsBrief Overview of Digital Sound Field Programs Using Digital Sound Field Processor DSPJazz Club Program Feature Concert VideoMovie Theater TV SportsTo play a source with the digital sound field processor Adjustment of the Rear Level Adjustment of the Center LevelMm Movie Adjustment of Delay TimeTheater 120 90 60 Setting the Sleep TimerTo cancel the selected Sleep time To set the Sleep timeSide panel Remote Control TransmitterBasic Operations When the lid is open Lid is openedReset button Master Volume up and down keys Sleep timer keySystem Power and OFF keys Reset buttonEmpty keys 1 Learning NEW Control Functions When the lid is openKeys which can have three functions 1, 2, 3 To use these keysAbout the marks shown on the remote control transmitter Using Operation Control Keys When the lid is closedOperation Except REC/PAUSE, A/B, DIR a and B To operate your VCR+10 Switch Macro Operations When the lid is closedSetting the Macro switch Preset macro keysOn area C of keys Macro keyOn area a of keys On area B of keysLearning a NEW Function Memory back-up Making a NEW MacroClearing Learned Functions Trouble shooting guide To Clear All Learned FunctionsTo Clear a Learned Function Troubleshooting Specifications General Seccion DE AM
Top Page Image Contents