Yamaha RX-V692 RX-V592 Basic Operations, To turn off the power, Provided for RX-V692 only

Page 25

BASIC OPERATIONS

TO PLAY A SOURCE

2

3

1, 6

	l6
20	l2
28	8
40	4
60	2
	0
	–dB

English

	: Provided for RX-V692 only.	4	7
	: Provided for RX-V692 only.

1	VOLUME
	VOLUME
	l6
	20	l2
	28	8
	40	4

602

0

–dB

Set to the “∞ ” position.

2 Turn the power on.

POWER

3 Select the desired input source by using the input selector buttons.

(For video sources, turn the TV/monitor ON.)

VCR	TV/DBS	DVD/LD
VIDEO AUX	TAPE (MD) MON

*The name of the selected input source will appear on the display.

4 Select the main speakers to be used.

SPEAKERS

A B

ON

*If you use two main speaker systems, press both the A and B switches.

5 Play the source. (For detailed information on the tuning operation, refer to page 26.)

6	l6
	VOLUME
20	l2
28	8
40	4

602

0

–dB

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to page 25) and use the digital sound field processor. (Refer to page 32.)

Notes on using the input selector buttons

●Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel.

*To select the source connected to the VIDEO AUX terminals on the front panel, press VIDEO AUX.

●The selection of TAPE (MD) MON cannot be canceled by pressing another input selector button. To cancel it, press TAPE (MD) MON again so that “TAPE MONITOR” disappears from the display.

When you select a button other than TAPE (MD) MON, make sure that “TAPE MONITOR” is not illuminated on the display.

●If you select the input selector button for a video source without canceling the selection of TAPE (MD) MON, the playback result will be the video image from the video source and the sound from the audio tape (or MD etc.).

●Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected.

To turn off the power

Press the POWER switch again.

23

Image 25

Contents RX-V692 RX-V592 Safety Instructions FCC Information for US customers only We Want You Listening For a Lifetime for US customers onlyFor US customers only Important Notice do not Modify this UnitContents Speaker Configuration FeaturesFor Canadian Customers Battery replacement Digital Sound Field Processing Profile of this UnitDolby Pro Logic Surround Dolby Pro Logic Surround + DSPSpeaker Configuration Speaker SetupSpeaker Placement Speaker ConfigurationConnections with Other Components ConnectionsOutput GND Video Audio OUT Video OUT A. modelGND terminal For turntable use AC* Outlets Switched6CH Discrete Output Connecting with a Dolby Digital AC-3 DecoderRX-V692 only Left Main speakers B Connecting SpeakersHow to Connect Remote Control IN, OUT terminalsRear Surround Output terminals Impedance Selector switchMain Output terminals Center Output terminalAntenna Connections Connecting the AM loop antennaGND terminal AM loopRX-V692 Controls and Their FunctionsTreble BassCenter Mode button Tuning DOWN/UP buttonVideo AUX terminals Auto Tuning indicator Memory indicatorTape Monitor indicator Stereo indicatorSet to the OFF Speaker Balance AdjustmentFor 4 speaker configuration For 5 speaker configurationAdjust its level Basic Operations To turn off the powerProvided for RX-V692 only To Record a Source to Tape or MD Adjusting the Bass and Treble controls Adjusting the Balance controlUsing the Tone Bypass switch Selecting the Speaker systemTuning off Tuning OperationsSelect the reception band FM or AM confirming it on Manual Preset Tuning Preset TuningWhen the automatic preset tuning is finished Automatic Preset TuningTo recall a preset station To store stationsExample Exchanging Preset StationsBrief Overview of Digital Sound Field Programs Using Digital Sound Field Processor DSPMovie Theater Program Feature Concert VideoTV Sports Jazz ClubTo play a source with the digital sound field processor Adjustment of the Rear Level Adjustment of the Center LevelMm Movie Adjustment of Delay TimeTheater To cancel the selected Sleep time Setting the Sleep TimerTo set the Sleep time 120 90 60Basic Operations When the lid is open Remote Control TransmitterLid is opened Side panelSystem Power and OFF keys Sleep timer keyReset button Reset button Master Volume up and down keysKeys which can have three functions 1, 2, 3 Learning NEW Control Functions When the lid is openTo use these keys Empty keys 1About the marks shown on the remote control transmitter Using Operation Control Keys When the lid is closedOperation Except REC/PAUSE, A/B, DIR a and B To operate your VCR+10 Setting the Macro switch Macro Operations When the lid is closedPreset macro keys SwitchOn area a of keys Macro keyOn area B of keys On area C of keysLearning a NEW Function Memory back-up Making a NEW MacroClearing Learned Functions Trouble shooting guide To Clear All Learned FunctionsTo Clear a Learned Function Troubleshooting Specifications General Seccion DE AM