Pelco IS310-CH, IS310-CW, IS310-DW manual Attach Base, Exploded Parts View

WARNING: To prevent damage to the camera or lens, the camera must be installed in the proper hole of the mounting bracket (refer to Figure 6). If the camera is not installed in the correct hole, the window of the enclosure may be forced against the lens.

Figure 6. Camera Mounting Holes

ATTACH BASE

1.Release the base locking ring for access to the mounting holes.

2.Attach the base to an adapter plate or conduit adapter using the two 6-32 x 1.25-inch tamper-resistant screws supplied with the adapters. Use the 1/8-inch hollow screwdriver bit supplied with the Camclosure.

Mounting hardware for all other applications is not supplied.