Pelco IXE manual System TAB, General Settings, Changing the Device Name

Page 22

SYSTEM TAB

Use the System tab to view the device’s current firmware version, change the device name, enable/disable the power LED, and set up a server for event system email.

Figure 17. System Settings Page

GENERAL SETTINGS

Device Name: The user-friendly description of the camera. This name is displayed in the gray area near the top of all pages.

Enable LED: Select Off to disable the power LED located on the front of the camera. The default setting is On.

NOTE: If the LED is set to Off, it will still glow solid amber and then flash green during the configuration sequence.

SMTP: Configure the Simple Mail Transfer Protocol (SMTP) server to send an email notification when an event handler is activated. Consult your network administrator for information on configuring email notification on your local network.

Changing the Device Name

The default device name begins with “IP Camera” followed by the model number and serial number of the camera.

To change the device name:

1.Click the Device Name box and highlight the text.

2.Type a user-friendly name into the Device Name box (2 to 64 characters). A user-friendly name makes it easier to recognize the device on the network. Examples of user-friendly names are Front Door, Lobby, or Parking Lot.

3.Click Save to save the new device name, or click Reset to revert to the previously saved device name.

22

C2953M-A (5/09)

Page 21 Page 23
Image 22
Page 21 Page 23
Contents IXE Series Extended Platform Network Camera Page Contents Help Menu Log Off Menu Specifications List of Illustrations Regulatory Notices Radio and Television InterferenceOpen Source Software Notice Video Quality CautionFrame Rate Notice Regarding User-Selected Options BUILT-IN Analytics DescriptionGetting Started ModelsParts List Camera LayoutProduct Label Remove Back CoverInstallation PinC2953M-A 5/09 Service Cable Attaching the 2.5 mm Monaural Headphone PlugALARM, RELAY, and 24 VAC Connector WiringCAT5 Cable Connecting a Relay Device Connecting AlarmsAlarm Connections Accessing the IP Camera Using a WEB BrowserOperation Live Video Live Video page Icons Select a Stream Take a SnapshotChanging the Screen Layout Maximize the Viewing AreaOpen the Stream in a NEW Window Multiscreen ViewSettings Settings Page MenusSystem TAB General SettingsChanging the Device Name Restore ALL Camera Defaults Time SettingsReboot Camera Configuring the Camera Date and Time SettingsChanging the Hostname Network TABGeneral Dhcp OnSSL Dhcp OffGenerate Certificate Request Generate Self-Signed CertificateSSH Imaging TAB OrientationDigital Processing Exposure Auto ExposureAuto Exposure Manual Exposure Manual ExposureAuto Day Night DAY NightManual Day Night Focus Auto FocusManual Focus Tone MAP White Balance Auto White BalanceManual White Balance Select Preset Video Streams TABCustom Configuration Image Rate ResolutionCompression Standards Bit RateProfile Rate ControlGOP Structure Users Users and Groups TABCreating a New User Editing a User Deleting a User Groups Creating a New GroupEditing a Group Deleting a GroupGeneral Settings Sources Creating an Alarm Event SourceEvents TAB Creating a System Event SourceEditing an Event Source Creating a Timer Event SourceDeleting an Event Source Handlers Creating a Send Email Event HandlerCreating a Write Jpeg to SD Card Event Handler Creating an Upload Jpeg to FTP Server Event HandlerEditing an Event Handler Example Handler Filter SetupCreating an Open/Close Relay Event Handler Deleting an Event HandlersHelp Menu Log Off MenuElectrical SpecificationsGeneral MechanicalEnvironmental Analytics RequirementsPhysical C2953M-A 5/09 Page Product Warranty and Return Information
Related manuals
Manual 12 pages 56.06 Kb
Top Page Image Contents