2.Adjust the tilt limit stops.
Refer to Figure 7 for the location of the tilt limit stops (item 7). Turn the control unit on and tilt the unit to the desired up position.
Move the up limit cam until it touches the limit switch actuator. Push the cam against the actuator until it clicks, indicating that the limit switch has opened. Apply
Operate the pan/tilt to the desired down position.
Move the down limit cam until it touches the limit switch actuator. Push the cam against the actuator until it clicks, indicating that the limit switch has opened. Apply
|
|
| 4 |
|
| 5 | 3 |
|
|
| |
|
| 6 |
|
| 7 |
|
|
8 |
| F |
|
| E |
| |
|
|
| |
D |
|
|
|
C |
|
|
|
B |
|
|
|
A |
|
| 2 |
|
|
| |
9 |
|
|
|
| H |
|
|
| G |
| 1 |
|
| 10 | |
|
|
|
Figure 7. Tilt Limit Adjustment
Pelco Manual | 13 |