Adjusting the picture

#Press the MENU button to display the menu screen.

$Select the “PICTURE” menu from the main menu, and then press the ENTER button.

%Press the F or G button to select an item.

&Press the I or H button to adjust the value or change the setting. For items with selective setting or a bar scale, the individual adjustment screen will be displayed. Press the F or G button to switch the item.

For items without any selective setting or bar scale, press the ENTER button. The next screen for the item will then be displayed.

TINT

(NTSC/NTSC 4.43/YPBPR/PC/HDMI only)

This adjusts the flesh tones in the picture.

The flesh tones are greenish: I button

The flesh tones are reddish: H button

NOTE:

BWhen PC signals are being

Noise Reduction (NR)

If the signal is of such poor quality that picture interference appears, set “NR” to “ON”. To turn off the “NR” feature, set to “OFF”.

CINEMA REALITY

When an S-VIDEO/VIDEO signal is being input

When a YPBPR/PC/HDMI signal is being input

PICTURE MODE

The picture mode can be selected. Refer to page 33 for details.

CONTRAST

This adjusts the contrast of the picture. (Adjust the “BRIGHT” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: I button The picture is dark: H button

BRIGHT

This adjusts the darker areas (black areas) in the picture.

Black areas are too light: I button

Dark areas are too solid: H button

COLOR

(S-VIDEO/VIDEO/YPBPR/PC/HDMI only)

The color is too deep: I button

The color is too pale: H button

NOTE:

BWhen PC signals are being input, adjustment can be made only when 1 125 (1 080)/60i and 1 125 (1 080)/50i signals are being input.

input, adjustment can be made

only when 1 125 (1 080)/60i

and 1 125 (1 080)/50i signals

are being input.

SHARPNESS

To soften the picture details:

Ibutton

To sharpen the picture details:

Hbutton

COLOR TEMP.

White areas are bluish: I button

White areas are reddish: H button

DYNAMIC IRIS

ON

The amount of light is controlled to project the images with high contrast.

OFF

“DYNAMIC IRIS” is disabled.

[S-VIDEO/VIDEO/525i(480i) and 625i(576i) signals for YPBPR signals/1 125(1 080)/60i and 1 125(1 080)/50i signals for YPBPR, HDMI and PC signals only]

ON

 

Set to “ON” when you would like 24

 

frames per second pictures (such as

settings

OFF

movies) to project the source

 

faithfully.

 

Set to “OFF” when the projected

and

 

pictures have problems with

Adjustments

captions or subtitles when the

 

setting is “ON”.

44-ENGLISH

ENGLISH-45

Page 23
Image 23
Panasonic PT-AE900U manual Adjusting the picture