14-ENGLISH ENGLISH-15
Preparation
Connector panel#SERIAL connector (pages 22, 23, 24 and 66)
This connector is used to connect a personal computer to the projector in
order to control the projector externally. (RS-232C compatible)
$HDMI IN connector (page 23)
This connector is used to input HDMI signals.
%PC IN (RGB input) connector (page 24)
This connector is used to input RGB signals from a PC.
&COMPONENT 1 IN [YPBPR(CBCR) input] connectors (page 22)
These connectors are used to input YPBPRsignals from compatible
equipment such as a DVD player.
'S-VIDEO IN connector (page 22)
This connector is used to input signals from an S-VIDEO-compatible
equipment such as a video deck.
(VIDEO IN connector (page 22)
This connector is used to input video signals from a video equipment such
as a video deck.
)COMPONENT 2 IN [YPBPR(CBCR) input] connectors (page 22)
These connectors are used to input YPBPRsignals from compatible
equipment such as a DVD player.
#Connector panel (page 15)
$Air inlet port
Do not cover this port.
%Power input socket (AC IN) (page 26)
The accessory power cord is connected here.
Do not use any power cord other than the accessory power cord.
&Security lock
This can be used to connect a commercially-available theft-prevention
cable (manufactured by Kensington). This security lock is compatible with
the Microsaver Security System from Kensington.
'Lamp unit cover (page 57)
(MAIN POWER switch (pages 26 and 28)
Projector <Back and bottom>