Operation, Maintenance | Pelco PT780-24SL/PPSA specification

4.0 OPERATION

Refer to the manual for your control equipment for operating the pan/tilt unit.

If your enclosure has the heater blanket option, it is thermostatically controlled to turn on at 40°F (4.44°C) and turn off at 60°F (15.56°C). The heater blanket allows operation of the pan/tilt unit to -50°F (-45.56°C).

5.0 MAINTENANCE

H G

Figure 13. Pan/Tilt Adjustments

If you need to remove the enclosure, protect the RediLINK™ connector area against moisture, dust, dirt, etc. Failure to do so could result in a bad connection. Also, damage to the pan/tilt unit or enclosure could occur when power is turned on.

The following servicing should be done every six months with average use.

1.Remove the PT780’s outer casing. (Refer to step 1 under Section 3.4, PAN AND TILT STOP LIMIT ADJUSTMENTS.)

2.Inspect the gaskets around the cover, tilt shaft, and spindle for damage.

3.Refer to Figure 13. It shows the parts locations of the tilt assembly. Look for similar orientations of parts when adjusting the pan assembly.

4.Check the backlash adjustment.

Backlash is the slack or binding in a pan and tilt base mount. Determine back- lash by lifting the mount assembly, grasping the base, and wiggling it. There should not be any play or binding between the gear (A) and worm drive (B). Play or binding indicates a backlash problem.

•One backlash problem involves a worm and worm gear connection loose enough to cause slipping or tight enough to cause binding.

•The second involves a too-loose or too-tight chain, usually causing symptoms similar to the worm and worm gear problem—slipping or binding.

a.Verify that the worm drive (B) is fully seated in the worm gear (A). If it is not:

(1)Locate the worm-driven gear for either the pan or the tilt motor linkage. Loosen the three hex screws (F) holding the worm in place, but leave enough thread in place to hold the assembly on the mount.

(2)Using your thumbs, gently move the worm forward or pull the assembly back from the worm gear to either tighten or loosen the gear spacing to the worm gear. Move the base of the pan and tilt to check the adjust- ment.

(3)If you get movement in the base, press a finger down in the middle of the worm assembly. If you get no movement in the base, use your thumb and forefinger to pull the worm assembly back until you get movement.

(4)When the spacing is correct, tighten the hex screws. Start with the middle screw to ensure proper spacing.

(5)Remove the screw (C) in the gear train nut (D).

(6)Tighten the gear train nut to remove any play.

Pelco Manual C342M-PSA (11/98)

PT780-24SL/PPSA specifications

The Pelco PT780-24SL/PPSA is a high-performance pan-tilt-zoom (PTZ) camera designed for demanding surveillance applications. Engineered for versatility and durability, this camera system excels in providing reliable security solutions in various environments, from urban settings to remote locations.

One of the key features of the PT780-24SL/PPSA is its robust build quality. With an IP66 rating, this camera is protected against dust and water ingress, making it ideal for outdoor installations. The housing is constructed to withstand harsh weather conditions, extreme temperatures, and potential physical impacts, ensuring longevity and reliability in the field.

This PTZ camera offers a powerful 24X optical zoom, enabling detailed tracking of subjects over extended distances. The advanced zoom capabilities allow users to monitor large areas without sacrificing image resolution. With the support of digital zoom, operators can achieve an even closer view when necessary, enhancing the camera's utility for identifying individuals or objects clearly.

The PT780-24SL/PPSA is equipped with advanced imaging technologies, including a high-resolution CMOS sensor that delivers exceptional video quality. Users can expect stunning clarity and vibrant colors, even in challenging lighting conditions. The camera has integrated IR illumination, allowing for nighttime surveillance with clear images in complete darkness. This feature is crucial for round-the-clock security monitoring.

Another standout characteristic of this model is the high-speed pan and tilt functionality. The camera can rotate 360 degrees horizontally and has a wide vertical tilt range, enabling users to follow movement smoothly. This agility is essential for tracking fast-moving objects and providing comprehensive coverage of large areas.

The PT780-24SL/PPSA supports various network protocols and integrations, ensuring seamless compatibility with existing security systems. Its user-friendly interface allows operators to quickly adjust settings and navigate camera controls, enhancing the overall user experience.

In addition, this PTZ camera supports multiple video formats, making it adaptable to different surveillance configurations. The system can be easily integrated with Pelco’s suite of video management and recording solutions, allowing for centralized monitoring and efficient data management.

Overall, the Pelco PT780-24SL/PPSA is an exceptional choice for those in need of a dependable, high-definition surveillance solution. Its combination of superior imaging capabilities, robust construction, and advanced features make it a standout option for both commercial and residential security applications.