Pentax MZ-60 manual SET the Standard Program Mode

36Step 1

SET THE STANDARD PROGRAM MODE

For quick and easy shooting, set your camera for Standard program mode, autofocus, auto flash and single frame drive mode. This standard program mode allows you to take pictures by simply depressing the shutter release button. The camera selects the best combination of aperture and shutter speed setting.

1 Set the lens aperture ring to

the position.

To set the lens aperture ring to

the position, turn the aperture ring while holding down the aperture-A lock button on the lens.

2 Set the pointer mark	to
by moving the select
dial while depressing the
exposure mode button.

When the shutter release button is depressed halfway down, the shutter speed (TV) and aperture value (AV) are displayed on the LCD panel

✍MEMO

• The shutter cannot be released when an F, FA or A lens is attached with the

aperture ring set to other than

position