Step 2
SET THE AUTO POP UP FLASH
1 Depress the flash mode
button until 
appears on the LCD panel.
2 In this mode, the built-in flash automatically pops up when depressing the shutter button halfway down in the low light or backlight conditions.
✍MEMO
•The Built-in flash does not retract automatically, push the built-in flash down into the camera body after use.
•The built-in flash does not discharge when not required even though it has been in the up position. See page xx for more details.
•Do not use a lens hood when the built-in flash is used, as it may obstruct the path of the light coming from the flash, causing vignetting in the picture corners.
