SELECTING THE VARIOUS BUILT-IN FLASH MODES
At each depress of the flash mode button, the flash mode on the LCD panel changes as shown in the chart
Auto-popup | Auto-popup | Manual-popup | Manual-popup | Flash off |
| + | (See page xx) | + | (See page xx) |
| Red-eye reduction | | Red eye reduction | |
| | | (See page xx) | |
✍MEMO
•The auto-popup flash mode can only be set when one of 6 picture modes is selected.
•The built-in flash pops up automatically when is displayed on the LCD panel. But it discharges only when required. (Automatic flash function)
• or can only be set when one of 6 picture modes is selected.
•The auto-popup function of the built-in flash does not work when the AE lock function is in use.
•The automatic flash function can also be used with the external flash.
•Even if is displayed on the LCD panel, the built-in flash does not pop up automatically when the external flash has been mounted either with the power off or the external flash is not yet fully charged.
•If the red-eye reduction is used while the AF360 FGZ, etc. is set as a slave unit, the pre-flash will trigger the slave unit to discharge. Do not use red-eye reduction with slave unit.