Monitoring Functions
|
|
|
|
|
| 6 |
|
|
| Eng | Front | Prod |
|
|
|
| Off |
| 5 | |
|
|
|
|
| ||
|
|
| Prod | Rear | Progr | |
|
|
| Ext | Loc | ||
|
|
|
| |||
|
|
| Mix |
|
|
|
|
|
|
| Call | Eng |
|
|
| CVBS (option) |
|
| ||
1 |
|
|
| Mic |
|
|
|
| VF | Ext |
|
|
|
|
| Front Rear 48V |
|
|
| |
2 |
| Scrip |
|
|
| 7 |
|
| Light |
|
|
|
|
|
| Breaker |
| DC in |
|
|
| 3 | Power on |
|
|
|
|
|
|
|
|
| 8 | |
|
| TP |
| 48V On |
| |
|
|
|
|
|
| |
|
| Ext 1 |
|
|
|
|
|
| Ext 2 |
|
|
|
|
|
| 12V 1,5A DC Out |
|
|
|
|
|
|
|
|
| Mic 2 |
|
|
| 4 |
|
|
|
|
1CVBS output connector
This BNC connector provides a 1Vpp CVBS output signal when the optional encoder (LDK 5405/00 for PAL or LDK 5405/50 for NTSC) is fitted.
2Viewfinder / External video output connector
This BNC connector carries the viewfinder signal or the external video signal from the Base Station depending on the position of switch 3 .
3Video output selection switch
This switch determines whether the viewfinder signal from the camera or the external video signal from the Base Station is available at connector
2.
4External signal selection switch
This switch selects either the EXT1 or EXT 2 signal for display in the viewfinder when the viewfinder signal selection switch 6 is in the EXT position.
5Viewfinder selection switch
This switch is used to select the camera Y signal or an external signal - set with 6 - for display in the viewfinder. The Ret. button on the lens also selects this signal in parallel with this switch.
6External signal selection switch
This switch selects the signal displayed in the
| viewfinder when the viewfinder signal selection | |
| switch | 5 is in the EXT position. The signal |
| displayed is as follows: | |
EXT | : | Base Station external input 1. |
MIX | : | Base Station external input 1 and |
|
| camera Y signal mixed. |
Note: Switches 5 and 6 are disabled when the SuperXPander is used.
7Tally switch
The tally switch is used to control the tally indicator at the front of the viewfinder.
When this switch is set to the ON position, the tally indicator light when the camera is
When this switch is set to the OFF position, the tally indicator does not light when the camera is on- air.
The tally swith does not control the tally indicator at the rear of the carrying handle.
8Tally indicators (red)
The red tally indicators at the front of the viewfinder and at the rear of the carrying handle light to indicate that the camera is
Location of Controls and Functions | Operator's Manual LDK 200 Triax |