Smart Card
Three smart cards are delivered with each camera. These comprise of two user cards and one owner card.
The owner's smart card has three functions:
•As an access control device to the security settings of the camera.
•As a storage device for four scene files.
•As a storage device for two operator files.
The owner card is unique to every camera. Owner card and camera must have the same serial number.
The user smart card has two functions:
•As a storage device for four scene files.
•As a storage device for two operator files.
Access control
The owner card is used to set the user level. There are four user levels present in the camera. These restrict access, in varying degrees, to the operational controls. The Appendix indicates which functions are available at each user level. (The owner card also gives access to a service level; refer to the Technical Manual for more information about this level.)
|
| Made in Holland |
TYPE | OWNER CARD | |
FACT/NC | 3922 | 407 24981 |
SERIAL NR. | 5038 |
|
Use waterproof marker or pencil to fill in
COMPANY:
USER:
DATE:
SCENE FILE
1.
2.
3.
4.
OPERATOR FILE
1.
2.
Printed by DocuCards, The Netherlands
Owner card
Scene files
Both the user card and the owner card allow four different scene files to be stored on the card. The recall and storage of a scene file is carried out via the Files menu of the menu system. A scene file contains information relating to the video settings.
Operator files
Both the user card and the owner card allow two different operator files to be stored on the card. The recall and storage of a operator file is carried out via the Files menu of the menu system. An operator file contains information relating to the
Note: Only use an original Philips camera card. Store the owner card in a safe place.
LDK 100
User card
Use waterproof marker or pencil to fill in
COMPANY:
USER:
DATE:
SCENE FILE
1.
2.
3.
4.
OPERATOR FILE
1.
2.
Printed by DocuCards, The Netherlands
User card
Introduction | Operator's Manual LDK 200 Triax |