Technicolor - Thomson RP5430 manual Files Menu Features, Install Menu Features

Page 52

Systems Menu

Files Menu Features

A user of the LDK 200 camera can have access to 15 different files. This number can be extended by using additional scene file smart cards. The Files menu is used to recall and store these files. There are two types of file:

*scene files

*operator files.

A scene file contains values related to the picture performance. The operator file contains values related to the set-up of the camera (viewfinder, lens and installation parameters).

The appendix indicates the functions that are stored in the scene file and those functions that are stored in an operator file.

Scene files

Four scene files are stored in the camera itself (SCAM1,SCAM2, SCAM3 and SCAM4). Another four scene files can be stored on the smart card (SCARD1, SCARD2, SCARD3 and SCARD4).

A STANDARD scene file (preselected as either factory or customer defined) is stored in the camera.

Note: The standard customer scene file is stored via the Security menu, not the Files menu. The decision to use the factory defined file or the customer defined file as the standard file is also made in this menu.

The Files menu enables the scene files to be stored and recalled using the store and recall entries of the menu system.

If the message NOK is displayed then the old values are restored. If the camera is on-air when a scene file is recalled then the recalled values do not become active until the camera goes off air.

Operator files

The Files menu also allows the recall of the opererator file stored in the camera (OCAM1) or one of the two operator files (OCARD1 and OCARD2) stored on the smart card. These files contain information for setting up the non-video configuration of the camera.

A STANDARD operator files (factory or customer defined) is stored in the camera.

Note: The standard customer operator file is stored via the Security menu, not the Files menu. The decision to use the factory defined file or the customer defined file as the standard file is also made in this menu.

Install Menu Features

Gain

The gain can be selected in five steps: -, 0, +, ++ and

+++.The actual value of the gain in dB can be assigned to these symbols. This is done in the Install menu.

The "-" can be set to -6dB or -3dB. The '0' is always 0dB.

The '+' can be set to 6, 9, 12 or 18dB . The '++' can be set to 9, 12, 18 or 24dB. The "+++" can be set to: 30 or 36dB

Disable camera

The disable camera function is a protection function which prevents unathorised interference with the camera and provides an additional level of security. Setting disable camera to ON is similar to using User level 0 to protect the settings of the camera.

6-6

Operator's Manual LDK 200 Triax

Operating the Menu System

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Operator’s Manual Declaration of Conformity Contents LDK 200 Triax Multi-role Camera Operators ManualAbout this Manual Purpose of this manualIntended audience Structure of this manualSection Technology Access control Smart CardScene files Operator filesFeatures OptionsImportant Precautions Operators Manual LDK 200 Triax Introduction Assembling the Units Transport Case Lens Mounting the 1.5-inch viewfinder and microphone holder Inch ViewfinderPositioning the 1.5-inch viewfinder Inch Viewfinder Accessories Wide angle eyepiece Left eye adapterOther Viewfinders Zoom Controls Microphone Tripod Adapter Plate Digi Shoulder Pad Rain and Off-use Cover Script board Top Light Operator’s Manual LDK 200 Triax Assembling the Units Configurations Basic Configurations OCPLocation of Controls and Functions Power Supply Security and Access Smart card slotVideo Functions Filter switchesExtended Iris button Black Stretch switch Colour Temp. switch White BalColour Bars switch Bars Gain selection switchVertical Shift switch V-Shift Exposure Time switchVTR Start button Monitoring Functions Option switch ViewfinderBrightness control Contrast controlViewfinder Indicators Audio Intercom System Menu Select switch Lens Video Install Files Security Diagnostics ServiceControl Functions System Menu Rotary controlScript Light connector Aux connectorTracker connector Auxilary FunctionsPage Shooting Using the Camera Physical set-up and power supplyStandard settings Smart-TouchColour Bar Gain selectionColour temperature selection Auto-White Balance Shooting Screens Clean ScanCRT Exposure Exposure Time Operators Manual LDK 200 Triax Shooting Using the Menu System Introduction Systems Menu Entering the Systems menuFinding your way Leaving the Systems MenuUndoing changes Making changesMenu Structure Security Menu for Owners Access User LevelsRun Hours PIN CodeFiles Menu Features Install Menu FeaturesAppendix Contents Appendix System Menu Structure Main MenuVF Menu Lens Menu Video Menu Gain KneeGamma MatrixShading Install Menu LDK 5411 Betacam Adapter Intercom Install Menu LDK 5400 Triax AdapterAudio Install Menu LDK 5430 Triax Adapter Tracker Channel TP/Aux videoProg Channel Files Menu Security Menu Diagnostics Menu Service Menu List of System Menu Functions Function Path in MenuMCP List of Abbreviations Abbreviation MeaningCamerahead Software Status
Top Page Image Contents