GE manual Setting up the camera, To quickly put the Mini PTZ 12X camera into operation

7.Further secure the bubble by turning the two slotted screws counterclockwise so that they touch the dome camera housing.

8.Set the DIP switches.

Setting up the camera

To quickly put the Mini PTZ 12X camera into operation

1.Configure the camera’s DIP switches, which are located on the top of the camera.

2.Set the camera communication protocol.

3.Set the RS-485 communication DIP switch.

4.Set the camera ID.

5.Wire the camera.

6.Connect the camera to a monitor.

7.Mount the camera to the ceiling. See the user manual for information.

8.Program the camera.