GE PTZ 12X manual Introduction, Package contents, Installation environment

Page 4

Introduction

This pocket guide provides basic information on setting up and using the TruVision Mini PTZ camera.

Package contents

The TruVision Mini PTZ camera is shipped with the following items:

Dome camera and 4.7” bubble

Mounting accessories (hard ceiling mount, plastic fixing plate, and screws)

I/O interface cable for power, video, alarms, and serial data

TruVision Mini PTZ 12X Camera pocket guide

TruVision Mini PTZ 12X Camera user manual (on CD)

Installation environment

When installing your camera, consider these factors:

Handling: Handle the camera carefully. Avoid striking, shaking, etc. Improper handing or storage could damage the camera.

Electrical: Install electrical wiring carefully. It should be done by qualified service personnel. The input electricity to the unit has a tolerance of 24 VAC ± 10%. Do not overload the power cord or adapter.

2

TruVision Mini PTZ 12X Camera

 

Pocket Guide

Image 4 Contents
TruVision Mini PTZ 12X Camera Copyright Content Installation environment Package contentsIntroduction TruVision Mini PTZ 12X Camera Pocket Guide Example of a system setup Cable requirementsPower VAC cable. To determine the size of cable Recommended cable requirements Operation Cable requirementRemoving the protective cover from the outdoor camera TruVision Mini PTZ 12X Camera Pocket Guide Setting up the camera To quickly put the Mini PTZ 12X camera into operationCamera DIP switches Setting the camera protocolDome camera protocols supported Protocol Switch position Setting the communication DIP switchesTo set the dome camera protocol Setting the dome camera site ID Pin connector description 22-pin connector Pin DescriptionWiring the dome camera 24 VAC I/O interface cableTo wire the dome camera Ground wire for power input Main menu overviewMain menu screens To access the programming menus Using a keypad to program menusNavigating the menus Navigating the programming menus Key Function Joystick motion Page