GE KTC-217CV3, KTC-217CV9, KTC-247CEV3, KTC-247CEV9 manual Making Cable Connections

Page 13

KTC-117/217/247 User Manual

Making Cable Connections

5MAKING CABLE CONNECTIONS

Note: This camera is 24 VAC only.

See Figure 15 and perform the following.

24 VAC	Power LED	To monitor
power source	indicator

Figure 15. Power and video connections

1)Attach the provided BNC connectors to the ends of the video cable.

2)Connect the video cable to the monitor’s video in BNC connector.

3)Connect the other end of the video cable to the camera’s VIDEO OUT connector.

1041075C / November 2003

13

Image 13

Contents Page For technical support before and after installation, call Table of Contents Making Cable Connections Making Camera AdjustmentsCustomer Support Before YOU BeginSee for the camera models and their descriptions IntroductionCamera back panel Camera Back PanelBacklight Compensation BLC OFF or on Programming the DIP SwitchFlicker Control FL OFF or on View Normal or Mirror White Balance ATW or FIXZoom Normal or E Zoom Mounting on a vertical surface Installing the Bracket and CameraBracket parts Mounting the BracketLoosening the wing nut to free the ball and socket bolt Attaching the Camera to the BracketTightening the wing nut to secure the camera position Adjusting the Camera AngleMaking Cable Connections Power and video connectionsMaking Cable Connections Opening the Housing Making Camera AdjustmentsAdjusting the Direct Drive Level Adjusting the Camera Zoom and FocusPage Page