GE KTC-117V3, KTC-117V9 manual Adjusting the Camera Angle

Page 12

Installing the Bracket and Camera

KTC-117/217/247 User Manual

4.3ADJUSTING THE CAMERA ANGLE

1)If necessary, turn the wing nut (Figure 8) on the bracket counterclockwise to free the ball and socket bolt (Figure 8). See Figure 11.

2)Swivel the camera on the ball and socket bolt to adjust the camera angle. See Figure 13.

3)Turn the wing nut clockwise to tighten it and secure the camera position. See Figure 14.

Figure 13. Adjusting the angle of the camera with the ball and socket bolt

Figure 14. Tightening the wing nut to secure the camera position

12

1041075C / November 2003

Image 12
Contents Page For technical support before and after installation, call Making Cable Connections Making Camera Adjustments Table of ContentsBefore YOU Begin Customer SupportIntroduction See for the camera models and their descriptionsCamera Back Panel Camera back panelProgramming the DIP Switch Backlight Compensation BLC OFF or onFlicker Control FL OFF or on White Balance ATW or FIX View Normal or MirrorZoom Normal or E Zoom Installing the Bracket and Camera Mounting on a vertical surfaceMounting the Bracket Bracket partsAttaching the Camera to the Bracket Loosening the wing nut to free the ball and socket boltAdjusting the Camera Angle Tightening the wing nut to secure the camera positionPower and video connections Making Cable ConnectionsMaking Cable Connections Making Camera Adjustments Opening the HousingAdjusting the Camera Zoom and Focus Adjusting the Direct Drive LevelPage Page