Samsung LW17M2 Setting the Picture, Changing the Picture Standard, Adjusting the Custom Picture

SETTING THE PICTURE

Changing the Picture Standard

You can select the type of picture which best corresponds to your

viewing requirements.
1.	Press the MENU button to display the menu. Press the or button to
	select “Picture”, then press the ENTER		button.
2.	Press the ENTER	button to select “Mode”.
3.	Press the or	button to select the desired picture effect.
	Press the ENTER	button.

4. Press the EXIT button to exit.

	Dynamic: Selects the picture for high-definition in a bright room.
You can also press the	Standard: Selects the picture for optimum display in a normal environment.
	Movie: Selects the picture for comfortable display in a dark room.
P.MODE button on the remote
	Custom: Select to view your favorite display settings.
control to select one of the
	(Refer to “Adjusting the Custom Picture” on page 11)
picture settings.
	The Picture mode must be adjusted separately for each input source.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.

2.	Press the	or	button to select “Custom”,
	then press the ENTER			button.

3.	Press the	or	button to select a particular item.
	Press the ENTER		button.
4.	Press the	or	button to decrease or increase the value of a
	particular item. Press the ENTER			button.

5.Press the EXIT button to exit.

Contrast: Adjusts the lightness and darkness between objects and the background.

Brightness: Adjusts the brightness of the whole screen.

Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

Colour: Adjusts the colours, making them lighter or darker.

Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.

If you make any changes to these settings, the picture mode is automatically switched to “Custom”.

English-11