GE KTC-117V3, KTC-117V9 manual Before YOU Begin, Customer Support

Page 4

Before You Begin

KTC-117/217/247 User Manual

BEFORE YOU BEGIN

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the following minimum qualifications:

A basic knowledge of CCTV systems and components

A basic knowledge of electrical wiring and low-voltage electrical hookups

Use this product only for the purpose for which it was designed.

Customer Support

For assistance in installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact Kalatel Technical Support:

GE Interlogix, Kalatel division

Call: 800-469-1676

Fax: 541-752-9096

Note: You should be at the equipment, ready with details before calling Technical Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING, CAUTION, and Note statements identify potential hazards:

*WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

**CAUTION:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

*This symbol indicates electrical warnings and cautions.

**This symbol indicates general warnings and cautions.

4

1041075C / November 2003

Image 4
Contents Page For technical support before and after installation, call Making Cable Connections Making Camera Adjustments Table of ContentsBefore YOU Begin Customer SupportIntroduction See for the camera models and their descriptionsCamera Back Panel Camera back panelBacklight Compensation BLC OFF or on Programming the DIP SwitchFlicker Control FL OFF or on View Normal or Mirror White Balance ATW or FIXZoom Normal or E Zoom Installing the Bracket and Camera Mounting on a vertical surfaceMounting the Bracket Bracket partsAttaching the Camera to the Bracket Loosening the wing nut to free the ball and socket boltAdjusting the Camera Angle Tightening the wing nut to secure the camera positionPower and video connections Making Cable ConnectionsMaking Cable Connections Making Camera Adjustments Opening the HousingAdjusting the Camera Zoom and Focus Adjusting the Direct Drive LevelPage Page