Honeywell HD4UX manual Setting the Day/Night Control, CLR Burst, TDN Delay

Setting the Day/Night Control

The table below explains the options on the DAY/NIGHT SETUP menu.

DAY/NIGHT SETUP

DAY/NIGHT SETUP			AUTO
NIGHT MODE ..				ON
> TDN DELAY	0			10
		!
PREVIOUS PAGE .

Note This setting is dependent on the AGC setting (See >AGC on page 18).

>DAY/NIGHT SETUP Select either:

	<AUTO> (default) depending on light level, the camera automatically switches from
	color to black and white.
	<OFF> the camera stays color mode regardless of light level.
	<ON> the camera stays in black and white mode regardless of light level.
>CLR BURST	The CLR BURST screen determines the video signal type used when the camera
	switches from color to black and white mode. The options are:
	<ON> (default) B/W with color burst.
	<OFF> B/W without color burst.
>TDN DELAY	Sets the time period in seconds that the camera waits before switching modes. This
	prevents unnecessary switching (for example, when an object passes briefly in front of
	the camera.)

Note Certain video recorders require color carrier/burst to operate.

Document 800-00031 Rev A	21
04/08