Honeywell HD4UX manual Adjusting the Lens Focus, Gimbal Adjustment

Figure 6	Gimbal Adjustment
	Top view
Locking screw. Loosen to		Locking
adjust Horizontal (B).	Joystick (5 way) See
	Camera Functions.	screw

C

Set focal length	Set focus
(bottom)	(top)

Angle view

Setscrews (x2). Loosen to adjust Pan (C). Other setscrew located on opposite side.

B

Legend

AA = Tilt rotation

B = Horizontal rotation C = Pan rotation

Adjusting the Lens Focus

Lenses are pre-focused at the factory but may require a final adjustment after installation because the optical effect of the dome may cause a slight defocusing of the lens.

TECH TIP! To check the focus, hold the dome over the lens while making any adjustments.

To adjust the camera direction, view angle and focus, connect the service monitor cable (supplied) to the video monitor output.

14