GE CG400 manual Powering Your Camcorder, Using the Adapter/Charger, To Attach Adapter/Charger

Powering Your Camcorder

This section describes three ways to supply power to your camcorder:

■ AC Adapter/Charger ■ Battery ■ Car Cord Adapter (Optional)

Using the Adapter/Charger

The adapter/charger lets you power your camcorder directly from standard household power. It operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. You may need a plug adapter in some countries. Consult your dealer.

4

2

1

To Attach Adapter/Charger:

1.Slide the OPEN-BATTbutton to open the battery compartment. Carefully open the compartment fully.

2.Plug one end of the DC power cord into the DC OUT jack on the adapter/ charger and the other end into the DC IN 6.5V jack on the side of the camcorder.

3.Close the battery compartment.

4.Plug the AC adapter/charger power cord into an AC operating outlet. The adapter/charger’s POWER indicator lights.

Tip: The battery level indicator has no meaning when you power the camcorder with the adapter/charger.

Caution: Do not use this adapter/charger for any purpose other than charging recommended battery or supplying power to the camcorder.

To Remove the Adapter/Charger:

1.Unplug the adapter/charger from the wall outlet.

2.Disconnect the DC power cord from the camcorder and adapter/charger.

Using Optional AC Plug Adapter

An optional plug adapter may be required in some countries.

Optional AC

AC 100-240V

Plug Adapter

1.Plug the adapter/charger’s plug into the AC plug adapter.

2.Plug the AC plug adapter into the AC outlet.

13