GE CG400 manual Audio/Video Cables AH069G 3-ft / AH070G 5-ft, AH011 Cable Transformer

Audio/Video Cables (AH069G 3-ft / AH070G 5-ft)

These cables are shielded for connecting AUDIO and VIDEO jacks. They have RCA-type phono plugs on each end.

Coaxial RF Cables (AH065G 6-ft / AH066G 10-ft)

These RF cables are used with the RF output adapter to

connect your

camcorder to a standard TV (one without audio/video input jacks) for playback. You may need other accessories.

193983 Cable Transformer

This 300-to-75 ohm transformer is used to connect a standard (300 ohm) antenna twin-lead to a standard round 75-ohm connector.

AH011 Cable Transformer

This 75-to-300 ohm

transformer is used to connect a standard 75

ohm antenna cable to

the 300-ohm screw terminals on a TV.

AH25 Y-Adapter

This Y-adapter allows you to connect your camcorder’s mono audio cable to a stereo TV or VCR.

Optional AC088 Tripod

Mounting the camcorder on a tripod, such as AC088, will keep the camcorder steady. This tripod’s fluid-effect head provides smooth camera pan and tilt. The grooved, tubular 3-section leg design folds down to 26" when not in use. Rubber feet allow for sure footing.

Cautions: Before using a tripod, make sure it is stable enough to hold the camcorder without falling over.

When attaching your camcorder to a tripod, be careful not to force the tripod screw into the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately three- eighths (3/8) inch. Forcing the screw could damage the mounting hole on the bottom of the camcorder.

Do not transport camcorder attached to tripod.

All specifications and descriptions of accessories are subject to change without notice.

4