Counters and Time-Remaining Display
Repeatedly press COUNTER DISPLAY to display the tape counter, tape counter with memory stop, elapsed time counter, or
FOCUS |
|
MANUAL |
|
| REVIEW |
FADE | W/B |
FOCUS |
|
| VCR |
| CAMERA |
| DATE/TIME |
SHUTTER |
|
PUSH/AUTO | COUNTER |
| CLOCK |
TITLE |
|
SELF TIMER |
|
CAMERA/VCR Switch
COUNTER RESET Button
COUNTER DISPLAY Button
Tape Counter
The tape counter helps you locate a place on the tape. Record the tape counter reading at the beginning and end of each recording session for future reference. Press COUNTER RESET whenever the tape counter is displayed to reset the counter to “0000”.
Tape Counter with Memory Stop
The tape counter’s
To use memory stop:
1.Repeatedly press COUNTER DISPLAY to display tape counter with memory stop (“M” appears with tape counter when memory stop is on).
2.Locate the place on the tape you want to return to, and press COUNTER/ RESET to reset tape counter to “M0000”.
3.Continue to record or play the tape. When you want to return to the place you marked, press the thumb trigger to stop recording (or press STOP to stop playback).
4.Make sure the CAMERA/VCR switch is in VCR. Then press REW (rewind). The tape will rewind until it reaches the time counter reading of “M0000”.
Note: Whenever the tape counter with memory stop is displayed in the viewfinder, the camcorder will stop rewinding or fast- forwarding when the counter reaches “M0000”. To continue rewinding or fast- forwarding the tape, press REW (rewind) or F.FWD
30