Hitachi CU-HD1500 operating instructions Facility names and functions Front

Facility names and functions (Front)

1

4

2

5

3

31 6

7

11 9

8 10

12

1 CCU POWER switch

CCU power on/off switch.

2CCU POWER LED Lights when power is on.

3 CABLE CHECK LED

OK: CAMERA POWER switch 4 can be

operated.

OPEN: Fiber cable not connected.

SHORT: Excess current in fiber cable.

Note: CAMERA POWER switch 4 is

inoperative when OPEN, SHORT LED is lighted.

4 CAMERA POWER switch

The switch lights during camera power on. When the camera power is off, only one channel intercom (CH1) is available.

Press the switch for three seconds or more, to turn off the camera power.

5 GL ON LED

Lights during genlock operation.

Note: When a different frame rate signal is input for genlock, the LED blinks and the signal is ignored.

6 R TALLY LED

Lights at red tally input or when CALL signal is sent from camera.

7 G TALLY LED

Lights at green tally input.

8 CALL button

Press to call the camera.

9INTERCOM LEVEL control Adjusts intercom listening volume.

10TALK ON/OFF switch

Intercom microphone on/off switch.

11PRIVATE/COMM switch

PRIVATE: Communicate with camera only

COMM: Communicate with entire system

12Intercom connector (XLR,5P) Connection for optional MT-12MF headset.

4