Hitachi CU-HD1500 operating instructions AC power supply operation, Camera stand alone operation

Page 21

System Configuration

Attach the Camera adapter(CA-HF1500) to the Camera head(SK-HD1500). Then connect the camera control panel and setup control unit to the CU-HD1500.

1. AC power supply operation

When the CU-HD1500 CCU POWER switch is set to ON, the optical fiber cable connection is checked automatically (it takes about 5 seconds), and then power can be supplied to the camera by pressing the CAMERA POWER button to enable a video output signal.

The CABLE CHECK LED lights OK when the optical fiber cable is normal. The intercom system is available when the CCU POWER switch is ON.

Note: When operation mode is changed from MAIN mode to STBY mode, wait for 10 seconds to restart the camera power.

Optical Fiber Cable

AC input

		Camera control unit
Camera Head	Camera Adaptor	CU-HD1500
SK-HD1500	CA-HF1500

Remote Control Unit

RU- 1500

2.Camera stand alone operation

Supply 12VDC to the CA-HF1500, but do not connect either optical fiber cable or SM fiber cable. The camera can be operated in stand-alone mode. The video signal appears at the camera MONI OUT and SDI OUT1/2 connectors.

7

Image 21

Contents CU-HD1500 Model No Serial No Safety Instructions Accessories CleaningPower Sources Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check LightningDie Anweisungen aufbewahren Alle Anweisungen lesenWarnungen beachten Anweisungen befolgenNetzkabelschutz Erdung oder PolarisierungBlitzschlag 15. ÜberlastungSicherheitsprüfung ErsatzteileAnbringung an der Wand oder an der Decke 24. WärmeLire les instructions AccessoiresConserver ces instructions Tenir compte des avertissementsSurcharge Foudre16. Pénétration d’objets et de liquides Substances inflammabes et explosivesFor Canada For USAPage Contents Page High-performance down converter Outline and featuresBuilt-in up converter HD-SDI 1080i trunk videoDo not disassemble or modify Fuse replacementKeep foreign object out of interior Select use and storage locations carefullyMaintenance tool & information Hybrid Fiber Optical Camera Cable & Connector HandlingCleaning Stick Canare Cletop 2.5/2.0 4FCMR Male ReceptacleFacility names and functions Front Important notice Facility names and functions RearFacility names and functions Rear & Front Camera stand alone operation AC power supply operation．DC power supply operation System Configuration Chart Function menu Function menuCamera menu TIME/DATE menu CU-FUNCTION menuOutput Select menu Return Select menuAssignment menu MIC Gain menu System Timing menuPIX Display menu SD Masking menu SD DTL menuPIX OUT camera status display ECC filter indicationCable check Cable check, Warning indicationBackup battery replacement Backup battery replacementConnector pin diagrams Service informationVoltage Contact 159 GND Switch setting for AC power supply Intercom system setting Video frame rate setting Network Settings DeviceInstaller Service information Enough operational administrative to IP Address etc.） External View Input signals Input output signals CU-HD1500Camera Control Unit CU-HD1500 Output Output signalsStandard Composition Accessories