Hitachi operating instructions Input output signals CU-HD1500, Input signals

Specifications

Camera Control Unit CU-HD1500

Power supply voltage	(J) AC100V 50Hz/60Hz (CU-HD1500J)
	(U) AC117V 60Hz	(CU-HD1500U)
	(E) AC230V 50Hz	(CU-HD1500E)
Power consumption	300W approx. (AC operation, including SK-HD1500
	,VF-402 ,CA-HF1500 and AUX POWER OUT 100VA)
Ambient Temperature	Operating：0℃ ～	+40℃
	Storage：-20℃～	+60℃
Dimensions	433(W)  88(H)  347(D) mm
Mass	10kg approx.
Maximum cable distance	1km (Full operation)
	4km (Without utility power)

■Input output signals (CU-HD1500)

Input signals

Camera Control Unit CU-HD1500 (INPUT)

GEN LOCK IN	B-BST 0.45Vp-p/75Ω(loop through)	BNC x1
	or HDTV tri-level sync 0.60Vp-p/75Ω
	(loop through)
DIGITAL RET IN(A) 1/2/3/4	HD-SDI or SD-SDI	BNC x4 + x2
(B) 1/2	・1080i：SMPTE292M	(A)x4：for VF
	・720p ：SMPTE292M	(B)x2：for floor monitor
	・SD-SDI : SMPTE259M-C
PROMPT IN	VS or VBS 1.0Vp-p/75Ω(loop through)	BNC x1
INTERCOM(HEAD SET)	-60dBm	XLR-5pin(Female)
COMMUNICATION		D-sub 15pin
・INTERCOM	0dBm , 600Ω at 4Wire	PD/ENG
	0dBu or -15dBu ,200Ω at 2Wire
	Clear-Com and RTS compatible
・PGM	0dBm/600Ω
・R/G TALLY	Contact or Voltage selectable
REMOTE 1	1.5Vp-p	4pin
REMOTE 2	1.5Vp-p	4pin
REMOTE 3	Remote	RJ-45
TRUNK	RS-422 (150k baud)	D-Sub 9 pin
	(RS-232C : Option)

31