Hitachi CU-HD1500 operating instructions Cable check, Warning indication

Page 31

Cable check, Warning indication

Cable check

CU-HD1500 automatically checks the condition of optical cable, and shows the results on both PIX OUT screen and LED indicators on front panel at start-up. If any troubles are detected, the camera power might be forced to shut down for safety.

		Indication	Content
	Screen: CHECK CAMERA CABLE		The power line may be short-circuited.
		CAMERA CABLE SHORT	Camera power defaults to off and camera power switch is
		CAMERA CABLE:HYBRID	rendered inoperative.
	LED:	SHORT lights	Cable mode is Selected the HYBRID.
	Screen: CAMERA CABLE OPEN		Cable is not connected.
		CAMERA CABLE:HYBRID	Camera power defaults to off and camera power switch is
	LED:	OPEN lights	rendered inoperative.
			Cable mode is Selected the HYBRID.
	Screen: CHECK CAMERA CABLE		The power line may be short-circuited.
		CAMERA CABLE SHORT	Camera power defaults to off and camera power switch is
	LED:	CAMERA CABLE:SINGLE	rendered inoperative.
	LED:	SHORT lights	Cable mode is Selected the SINGLE.
			Cable mode is Selected the SINGLE.
	Screen: CAMERA CABLE OPEN		Cable is not connected.
		OR CHECK CAMERA POWER	Camera power defaults to off and camera power switch is
		CAMERA CABLE:SINGLE	rendered inoperative.
	LED:	OPEN lights	rendered inoperative.
	LED:	OPEN lights	Cable mode is Selected the SINGLE.
			Cable mode is Selected the SINGLE.
	Screen: CCU FAN ALARM!!		FAN warning of CCU
			The internal fan is stopped or the rotating speed is lowered.
	Screen: CAMERA FAN ALARM!!		FAN warning of camera head or camera adaptor
			The adaptor internal fan is stopped or the rotating speed is
			lowered.
	Screen: CCU OPT WARNING!		The optical receiver level of CCU is low.
	LED: YELLOW in CCU OPT LEVEL		Check a fiber cable, and clean the terminal if necessary.
	lights
	Screen: CCU OPT ALARM !		The optical receiver level of CCU is very low.
	LED: RED in CCU OPT LEVEL lights		Check a fiber cable, and clean the terminal if necessary.
	Screen: CAMERA OPT WARNING!		The optical receiver level of camera head is low.
	LED: YELLOW in HEAD OPT LEVEL		Check a fiber cable, and clean the terminal if necessary.
	lights
	Screen: CAMERA OPT ALARM !		The optical receiver level of camera head is very low.
	LED: RED in HEAD OPT LEVEL		Check a fiber cable, and clean the terminal if necessary.
	lights
	LED: GL blinks		It blinks, when the synchronized signal of the format at the time of
			use and a different format is inputted.

17

Image 31

Contents CU-HD1500 Model No Serial No Safety Instructions Power-Cord Protection CleaningAccessories Power SourcesLightning Damage Requiring ServiceReplacement Parts Safety CheckAnweisungen befolgen Alle Anweisungen lesenDie Anweisungen aufbewahren Warnungen beachten15. Überlastung Erdung oder PolarisierungNetzkabelschutz Blitzschlag24. Wärme ErsatzteileSicherheitsprüfung Anbringung an der Wand oder an der DeckeTenir compte des avertissements AccessoiresLire les instructions Conserver ces instructionsSubstances inflammabes et explosives FoudreSurcharge 16. Pénétration d’objets et de liquidesFor Canada For USAPage Contents Page HD-SDI 1080i trunk video Outline and featuresHigh-performance down converter Built-in up converterSelect use and storage locations carefully Fuse replacementDo not disassemble or modify Keep foreign object out of interior4FCMR Male Receptacle Hybrid Fiber Optical Camera Cable & Connector HandlingMaintenance tool & information Cleaning Stick Canare Cletop 2.5/2.0Facility names and functions Front Important notice Facility names and functions RearFacility names and functions Rear & Front Camera stand alone operation AC power supply operation．DC power supply operation System Configuration Chart Function menu Function menuCamera menu TIME/DATE menu CU-FUNCTION menuReturn Select menu Output Select menuAssignment menu System Timing menu MIC Gain menuPIX Display menu SD Masking menu SD DTL menuPIX OUT camera status display ECC filter indicationCable check Cable check, Warning indicationBackup battery replacement Backup battery replacementConnector pin diagrams Service informationVoltage Contact 159 GND Switch setting for AC power supply Intercom system setting Video frame rate setting Network Settings DeviceInstaller Service information Enough operational administrative to IP Address etc.） External View Input signals Input output signals CU-HD1500Camera Control Unit CU-HD1500 Output Output signalsStandard Composition Accessories