Hasselblad H2 user manual Drive, Single, Multi exposure with ﬁlm magazine only

Page 54

Drive

There are three drive modes: Single, Continuous and when a ﬁlm mag- azine is attached, Multi exposure. They are all accessed by pressing the DRIVE button on the grip.

Single

12

��

��

3

�

In Single mode, an exposure is made when the shutter release button is pressed, the ﬁlm is advanced to the next frame and the camera is made ready for the next exposure. To make the next exposure however, you must ﬁrst release the shutter release button and then press again.

In camera active mode:

1)Press the DRIVE button on the grip.

2)Turn the front control wheel to: Single

3)Press Save to store the setting.

Continuous

��In Continuous mode, the camera automatically continues to make

exposures and advance the ﬁlm for the next exposure as long as

��you maintain pressure on the shutter release button (to the end of the ﬁlm) at a rate of approximately 2 frames per second.

In camera active mode:

1)Press the DRIVE button on the grip.

2)Turn the front control wheel to: Continuous

3)Press Save to store the setting.

Multi exposure (with ﬁlm magazine only)

12

��

�

In Multi exposure mode, the camera does not advance the ﬁlm after the ﬁrst exposure, only at the end of the pre-determined number of exposures. The frame options are: 2, 3, 4, 5 and ‘No limit’.

In camera active mode:

��	1) Press the DRIVE button on the grip.

2) Turn the front control wheel to: Multi exp.

			3)	Turn the rear control wheel to select the number of frames
				required.
	3	4	4)	Press Save (DRIVE button) to store the setting.
	3	4	5)	The LCD will display ﬁrstly that no frames have been exposed
			5)
				in the multi-sequence (For example, in the case of a three
			��	exposure setting the display will be Exp:0/3).
			6)	Press the shutter release button to make the ﬁrst exposure.

��7) The LCD will display how many frames have been exposed in the sequence (In the case of a three exposure setting the display will now be Exp:1/3. After the next exposure, the LCD

�	would then display 2/3 etc)

8) You can change your mind at any time to exit the sequence by pressing the DRIVE button to advance the ﬁlm to the next frame. The camera is then prepared for another new multi exposure sequence according to the initial setting.

 Please note this function is only available when a ﬁlm magazine is attached. It is not available with digital backs.

54

Image 54

Contents Manual V1/English for camera firmware version 9.1.0 or later N T E N T S Congratulations  What’s in the box Illustration shows the H2 with a Hasselblad CFH digital backFlash unit hot-shoe Quick Start H2-Kit only / H2- Separate items ﬁlm loading ﬁnally That’s it Familiarize yourself with the H2 Function Control Display AF button 160 ISO/ASA Autofocus setting, single Single setting Shot mode20s Average FramesExamples Second ‘aperture priority’ mode+0.7 EV EmptyDirection depends on user setting By pressing Drive button on gripBy pressing AF button on grip AF button / on / SEL Shutter release buttonFlash / Control Lock button / Exit Drive button / Save / EnterUser button AE-L buttonFilm wind-oﬀ button UP buttonEyesight correction adjustment wheel EV correction adjustment buttonEXP button Camera Body Integral ergonomic grip Pixel based LCD user interfaceRechargeable battery grip Carrying strapBatteries 5, 6, 7 Attaching the battery to the camera Battery chargerCharging the battery Rechargeable battery grip generalRechargeable battery grip precautions Viewﬁnder screenAccessory connection PC-connectorViewfinder Attaching and removing the viewﬁnder Eyepiece adjustmentParts & Components Rubber eye cupLenses Parts and components Stop down /depth-of-ﬁeld Infrared focus settingsDepth-of-ﬁeld calculation Focus aidCF Adapter Film Magazines Change up button LCD panelLCD illumination button Change down buttonDarkslide key Darkslide indicatorMagazine settings lock Film tab holderOperation BatteryBattery replacement Attaching and removing the magazineMagazine settings Film speed setting / BarcodeFilm length/number of frames Low-battery symbol Data imprint settingFrame counter setting ExampleFilm wind oﬀ Film loadingBeeper Unloading a ﬁlmDigital Photography Ixpress CFH Instant user interfaceFlexColor and workﬂow Three modes of operation and storageDirect shooting to Adobe DNG Colour reﬁnement new colour handling conceptIxpress CF Ixpress C digital backs and 3rd party digital backsLight Metering Exposure ControlLight metering and exposure control Metering methodSelecting metering method Press Save Drive button to retain the settingExposure method Reach M Manual 2bTing. Note that the appearance of a +/- symbol on the grip Automatic Exposure A, S, P, PvAE- L button Metered area reads ‘Zone 8’ Metered area beyond ﬁlm rangeWith the camera in active mode Ter speed setting as conﬁrmation of the settingExposure compensation Quick adjust wheel Proﬁles General Functions Power Manual focus Standby 3Autofocus Manual focus modeAutofocus override in Manual mode Single ShotAutofocus mode Manual override in autofocus modeContinuous Drive SingleMulti exposure with ﬁlm magazine only Pre-set proﬁles feature the following ProﬁlesMaking a proﬁle Using proﬁles Changing a proﬁle nameAdvanced Features Self timer options Bracketing options General overview Camera menuSelf timer Bracketing Interval timer Settings There are four main functionsSelf timer setting Mirror Up/ Delay sequence =Mirror goes down / Mirror remains up Bracketing Bracketing setting VationButton on the Bracketing screen, then Oﬀ AF button Interval setting IntervalSettings / Custom Options Custom optionsBracketing AF drive lens in MF or AF 5s 10s 15s 30s3 Step Clockwise Counter clockwiseCamera Ext ﬂash Oﬀ On OﬀHalf press Always Oﬀ Direct Half pressExp reset Saved Yes enables the display No disables the displayCustomizable button function list Imprint type setting Image Info ﬁlm magazines onlyImprint type Text setting / Proﬁle name changing TextSo, to write and store the characters, proceed as follows Changing text an example Date & Time Date & TimeSystem Status System StatusFlash To access the controls GeneralColour temperature full ﬂash 000 5,600º K Integral ﬂash1EV 50% Separate ﬂash unit connection and use Flash measure of separate ﬂash unitTo use ﬂash measure Optional Accessories ProshadeFocusing screen HS-standard 3043305 Battery Grip Rechargeable 3043348Focusing screen HS-grid 3043310 HMiAppendix Glossary of Terms Standard exposure Quick saveRoll ﬁlm Main screenTrue exposure True exposureAutomatic exposure P & Pv Mode Light metering method sensitivity distribution≈ 2% Technical speciﬁcations Camera TypeInterval timer External dimensions Body Problems, Equipment Care, Service & Guarantee Copyright Victor Hasselblad AB & Hasselblad A/S Sweden Denmark