EverFocus EZ550 manual OSD Menu & Configuration, Control Key General Operation Guide

C H A P T E R 3 O S D M E N U A N D C O N F I G U R A T I O N

Chapter

3

OSD Menu & Configuration

This chapter introduces how to configure the camera OSD menu.

3.1 Control Key General Operation Guide

Please turn the control key selection switch at the back panel to “OSD” ”(). Use the control key to do OSD menu setting.

Mini-Joystick

UP

The Cursors & the mini-joystick

I.Bring Up the General OSD Menu

Simply press the mini-joystick to bring up the general OSD menu.

II.Bring up the RS485 Setting Menu

Press the mini-joystick and hold for 5 seconds to bring up the RS485 setting menu.

III.Navigate among the OSD Menu Items

Turn the mini-joystick up (c) or down (d) to move the cursor up or down.

IV. Change Modes or Setting Parameters

Turn the mini-joystick left (e) or right (f) to adjust the mode or parameter of settings.

V. Switch to Sub-menu Screens

21