EverFocus EZ550 manual Sync, Motion Detection

C H A P T E R 3 O S D M E N U A N D C O N F I G U R A T I O N

3.3.8.3 SYNC

There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE- LOCK. In LINE-LOCK mode, without a synchronous generator, it synchronizes the video signal between cameras. The Line-Lock synchronization is only used in the places of 60Hz (NTSC models) or 50Hz (PAL models).

-INT: Internal synchronization

-LL: External line-lock synchronization

=> If you choose “LL”, you can adjust the phase your wish to set. Then press the mini- joystick. You can adjust the phase you wish to set from 0 to 359.

	SPECIAL
CAMERA ID		OFF	SYNC
COLOR ADJ. <┘
> SYNC.		LL <┘	> PHASE	++++++++ 0
MOTIION DET		OFF
PRIVACY		OFF
MIRROR		OFF
SHARPNESS		ON <┘
RESET
RETURN <┘

3.3.8.4 MOTION DETECTION

EZ550 enables you to observe movements of objects in 4 different places on the screen, the message “MOTION DETECTED” appears on the screen when movement is detected; therefore this helps to improve supervision efficiency. The camera detects an object’s movement by sensing discrepancy of outline.

1)Please direct the arrow to point to “MOTION DET” by turning the mini-joystick UP (c) or DOWN (d).

2)Select “ON” by turning the mini-joystick LEFT (e) or RIGHT (f).

3)Press the mini-joystick.

SPECIAL		MOTION DETECTION
CAMERA ID	OFF
COLOR ADJ. <┘		> AEREA SEL	AREA1
SYNC.	INT	AREA STATE	ON
> MOTIION DET	ON <┘	TOP	+++++++++ 10
PRIVACY	OFF	DOWN	+++++++++ 25
MIRROR	OFF	LEFT	+++++++++ 20
SHARPNESS	ON <┘	RIGHT	+++++++++ 40
RESET
RETURN <┘		Press SET to return

zPlease select the area you would like to detect from the 4 areas in AREA SEL mode.

zPlease select ON mode for the chosen area.

zPlease turn mini-joystick UP (c) or DOWN (d) to move between TOP, DOWN, LEFT and RIGHT for adjusting the size of the area.

zPlease turn mini-joystick LEFT (e) or RIGHT (f) to adjust the value for size of the area.

33