Sens-Up | EverFocus EZ550 specification

C H A P T E R 3 O S D M E N U A N D C O N F I G U R A T I O N

As the level of gain changes, the background noise in the low light level automatically decreases.

1.Please direct the arrow to point to “DNR” on the SETUP menu by turning the mini- joystick UP (c) or DOWN (d).

2.Select the mode you would like to operate by turning the mini-joystick LEFT (e) or RIGHT (f).

	SETUP
LENS		DC <┘
SHUTTER		___
WHITE BAL.		ATW
BACKLIGHT		OFF
AGC		MIDDLE
> DNR		LOW
SENS	-UP	AUTO <┘
SPECIAL <┘
EXIT

ÖOFF: No reduction in noise level.

ÖLOW: Little reduction in noise level with nearly no ghost image. Default value is LOW.

ÖMIDDLE: Just enough reduction in noise levels without causing much ghost imaging.

ÖHIGH: Huge reduction in noise level, which may cause much ghost imaging.

NOTE:

When AGC is turned off, DNR will be disabled.

3.3.7 SENS-UP

SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in the level of light under low light level conditions. The value is from x2 ~x128.

1.Please direct the arrow to point to “SENS UP” on the SETUP menu by turning the mini-joystick UP (c) or DOWN (d).

2.Select the mode you would like to operate by turning the mini-joystick LEFT (e) or RIGHT (f).

ÖAUTO: Low light level auto mode. Default value is AUTO (Up to X 10).

SETUP
LENS		DC <┘		LIMIT
SHUTTER		___	> AUTO	X 10
WHITE BAL.		ATW	> AUTO	X 10
BACKLIGHT		OFF
AGC		MIDDLE
DNR		LOW
> SENS-UP	<┘	AUTO <┘
SPECIAL	<┘
EXIT

ÖOFF: The function is disabled.