EverFocus ED610 External Light Sensor, Focus Ring, Zoom Ring, Lens, Power & Video pigtail cable

Page 10

(1)External Light Sensor

External Light sensor is used to detect the lighting level the environment. (The light sensor

is “down” when the internal camera module is properly positioned).

(2) Focus Ring

To set the focus, and loosen the focus ring knob, and turn the ring toward <F> or <N> as

necessary, and re-tighten when the adjustment is complete.

(3) Zoom Ring

To adjust the viewing angle, loosen the zoom ring knob. Turn the ring toward <W> to Zoom

out or <T> to Zoom in as necessary, and re-tighten when the adjustment is complete.

(4) Lens

The included vari-focal, DC iris lens allows manual adjustment of the field of view (zoom & focus). The choices for focal length range are:

￿2.8-10mm

￿9-22mm

(5)Power & Video pigtail cable

Connect power and video to pigtail cable

(6) Test Video Output Connector

When installing the camera, you can use this video connector to connect a portable monitor. This will allow you to easily adjust camera’s field of view and focus.

(7)OSD Menu joystick: Use the joystick to move the cursor Upwards/Downwards. This is used to select the item to be set.

Tilt the stick to the right or left. This is used to select or adjust the parameters of the selected item.

Press in on the stick to enter the setup menu. If the item has its own setting menu (sign ), press the stick again to display the sub- menu.

1.7 Related Products

In addition, you may order the following EverFocus products which are recommended for use with the camera to achieve the best performance:

L Type Bracket: BA-EDMS

EN220 5.6 inch LCD Test Monitor

- 9 -

Image 10
Contents Operation Instructions Model No. ED610 Table of Contents White Balance Control DAY Night Main Features Content ListPage WDR Specifications3DNR 12VDC/24VACDimensions 143mm//0.2 Ø 94.7mm/3.78Camera Component Description Exterior view Interior viewFront and Back Panel Layout Front Panel Layout External Light Sensor Power & Video pigtail cableTest Video Output Connector Focus RingSteps Mounting Camera 1 Drill the HolesMounting Ceiling Mount Wall Mount Adjusting Camera Adjusting Camera Position Adjusting Zoom and Focus Important Note when focusing a 9-22mm LensPage Camera Setting OSD User Setup Menu Close the Camera Cover after installation is completeCorrect Wrong not aligned Return to previous OSD Menu & ConfigurationIII. Switching to sub-menu screens Close the menu screenED610 Menu Tree Page Page AGC Auto Gain Control ExposureShutter SENSE-UP4 BLC WDR HsblcReturn White Balance Control DAY NightSpecial EXT3DNR CAM TitleFlip Effect 3.8.2.1 FreezeMirror RotateMotion Sync AdjustPrivacy Language3 RED ResetBlue ExitMED6G00100