EverFocus ED610 specifications Ceiling Mount

Page 13

2. Pull the cables to be connected to the power and video cables from the ceiling or wall.

Video output

Power input

 

 

3.Fix the camera base to ceiling or wall by using 3 screws and washers. The washers are used to create the IP66 seal and must be used.

Ceiling Mount:

- 12 -

Image 13
Contents Operation Instructions Model No. ED610 Table of Contents White Balance Control DAY Night Content List Main FeaturesPage 3DNR SpecificationsWDR 12VDC/24VAC143mm//0.2 Ø 94.7mm/3.78 DimensionsInterior view Camera Component Description Exterior viewFront and Back Panel Layout Front Panel Layout Test Video Output Connector Power & Video pigtail cableExternal Light Sensor Focus RingMounting Camera 1 Drill the Holes StepsMounting Ceiling Mount Wall Mount Adjusting Camera Adjusting Camera Position Important Note when focusing a 9-22mm Lens Adjusting Zoom and FocusPage Close the Camera Cover after installation is complete Camera Setting OSD User Setup MenuCorrect Wrong not aligned III. Switching to sub-menu screens OSD Menu & ConfigurationReturn to previous Close the menu screenED610 Menu Tree Page Page Shutter ExposureAGC Auto Gain Control SENSE-UP4 BLC WDR HsblcReturn DAY Night White Balance Control3DNR EXTSpecial CAM TitleMirror Effect 3.8.2.1 FreezeFlip RotateMotion Privacy AdjustSync LanguageBlue Reset3 RED ExitMED6G00100