EverFocus ED610 specifications Camera Setting OSD User Setup Menu

Page 17

2.2.3 Camera Setting

2.2.3.1 OSD User Setup Menu

This camera utilizes an On Screen Display (OSD) user setup menu.

Please refer to Chapter 3 OSD Menu & Configuration, to get more details about OSD menu usage.

2.2.4 Close the Camera Cover (after installation is complete)

The ED610 is specially designed with one inner cover and one outer cover ring for water-proofing and ease of installation. Please follow these instructions for closing the camera cover.

1. Align the window in the cover with the lens

2.Push the interior cover toward the base, until it completely covers the whole red gasket and is lined up parallel with camera base. (The cover must be aligned with the camera base or it cannot be closed. Then turn the outer cover ring clockwise to secure it tightly to the camera base.

Push the inner cover and cover the whole red gasket

Outer cover ring

- 16 -

Image 17
Contents Operation Instructions Model No. ED610 Table of Contents White Balance Control DAY Night Content List Main FeaturesPage 3DNR SpecificationsWDR 12VDC/24VAC143mm//0.2 Ø 94.7mm/3.78 DimensionsInterior view Camera Component Description Exterior viewFront and Back Panel Layout Front Panel Layout Test Video Output Connector Power & Video pigtail cableExternal Light Sensor Focus RingMounting Camera 1 Drill the Holes StepsMounting Ceiling Mount Wall Mount Adjusting Camera Adjusting Camera Position Important Note when focusing a 9-22mm Lens Adjusting Zoom and FocusPage Close the Camera Cover after installation is complete Camera Setting OSD User Setup MenuCorrect Wrong not aligned III. Switching to sub-menu screens OSD Menu & ConfigurationReturn to previous Close the menu screenED610 Menu Tree Page Page Shutter ExposureAGC Auto Gain Control SENSE-UP4 BLC Return HsblcWDR DAY Night White Balance Control3DNR EXTSpecial CAM TitleMirror Effect 3.8.2.1 FreezeFlip RotateMotion Privacy AdjustSync LanguageBlue Reset3 RED ExitMED6G00100