EPN3600
Machine Name Setting
Machine Name: Enter the name of the camera. The entered name will be displayed in the status display area.
Press Apply to apply the setting changes or Reset to reset without saving the change.
Set Time Zone
Time Zone: Select a time zone according to the location where the camera is in use.
Set Date/Time Manually
Date: Click the calendar and pick the date. Press << to go previous year, < to go previous month, > to go next month and >> to go next year.
Time: Click on Hour, Minute, Seconds, am/pm; then use Up arrow to increase value and Down arrow to decrease value.
Press Apply to apply the setting changes or Reset to reset without saving the change.
Set Date/Time Sync.
Check Enable NTP checkbox to enable NTP server.
NTP server: Time automatically adjusted by synchronizing with NTP server will be used as the standard time of the camera.
Sync. Internal: Select an interval (1 - 24 hours: in 1 hour intervals) of
78