EverFocus EPN3600 user manual Set FTP

Page 26

EPN3600

Password: Input the password if the SMTP server requires authentication.

Receiver Address: Input the e-mail address for receiving e-mail message when the EVENT is enabled and triggered. Please use “;” to separate addresses.

Sender Address: Input sender’s e-mail address, so that receiver can recognize the sender when an event message is sent out.

Send Test Mail: Click button to send a testing mail to the assigned address.

Set FTP

The settings relating to the FTP server used to transmit the alarm images can be configured here.

FTP Server: Enter the IP address or the host name of the FTP server.

FTP Port: Enter the port number for FTP server. Default is 21.

Recording Path: Assign the recording path.

User Name: Set FTP User’s name.

Password: Set FTP password.

PASV mode: Check to enable Passive mode. Normally enable Passive mode. When failed to establish the connection, uncheck "PASV" mode.

Test FTP Server: Click button to send a testing file to the assigned FTP server.

Click Apply to apply the setting changes or Reset to reset without saving the change.

26

Image 26

Contents User’s Manual EPN3600 Safety Notice About this documentTerms and Trademark SupportTable of Contents 2.3.2 Feature IntroductionEPN3600 Accessing the Camera Menu Default page of Camera MenuRecord Video StreamView Size PTZ Control Snapshot~ 10 Play Audio/Transmit Audio PTZ Control Window EPN3600 Select Object Number button, Go button and Clear buttonAuto Tracking -ON/OFF Manual Control TriggerStatus Display Manual Control ResetEvent signals System Info Information2 Log System Info InformationUser Config Text SettingRecording/Snapshot Export Setting Date/Time Format Used in TextNetwork Network Setting- Network NetworkEPN3600 Ddns setting DdnsBandwidth Setting BandwidthSMTP/FTP Set SmtpSet FTP Video Network Alarm reserved for PowerConSet Network Alarm Stream Setting Multi StreamingVideo Recording Setting CameraPosition Settings Set PresetAuto Mode Settings Set Auto TrackingHow to set Auto Tracking Start point 13 Video Camera -Auto Tracking WindowSet Pan/ Tilt Limits Set Pan Range16 Pan Range Setting Right Limit Setting Set Tilt Range17 Tilt Range Setting Down Limit Setting Clear Pan/ Clear Tilt Set tracking mask20 Tracking Mask Size Window EPN3600 EPN3600 Set Object Size 22 Set Object Size Max/Min frameAlso click Reset button to make options to default values How to set Auto Pan Set Auto PanEPN3600 Set Tour 24 Video Camera -Tour WindowSet Pattern 25 Video Camera -Pattern Window26 Video Camera -Set Pattern Recording Tour Seconds PTZ OSD Settings General Operation Guide of PTZ OSD SettingButton/ button Video Settings ExposureIris Mode Focus Mode 30 Video Settings Focus ModeDigital Zoom White BalanceBacklight 2.3.1.6 Day/Night34 PTZ Video Settings Day/Night Color NegativeWide Dynamic Range 2.3.2 OSD/AREASAreas 40 OSD/AREAS menu- Areas Sub-menu41 Areas setting Left Position Setting Window 43 Areas setting DirectionsDisplay Default NorthSet North Show OSD Zones How to set private zone Private ZonesTo adjust the size of private zone, use following buttons Info 53 Private Zone Zone ColorAudio ExitAudio 56 AudioUser 57 UserEvent ScheduleEvent Press Button to add an event conditionExample 1 Manual trigger-Upload to FTP Example 2 Alarm input Go to PTZ Preset with Auto-Tracking EPN3600 Motion 59 Event Event TabAlarm 60 Event Alarm TabTime Mask 61 Event Time MaskSystem Date/TimeEPN3600 Daylight Saving 63 System Daylight SavingMaintenance 64 System MaintenanceEPN3600 65 EKB200 setting EKB20066 EKB200 Panel EPN3600 Specifications Audio Network / Interface EverFocus