EverFocus EPN3600 user manual

Page 22

EPN3600

Note: If PPPoE is used as IP type, IP Utility software will not be able to detect the device.

IP address

When DHCP is not used, user needs to manually enter the IP address of the camera. Do not enter the IP address already used for PC or other network cameras.

Subnet Mask

This field is used to set the netmask for your network so that the IP speed dome will be recognized within the network. Example: 255.255.255.000. When DHCP is selected, the DHCP server will assign this value automatically.

Gateway

This field is used to set the gateway for your network so that the IP speed dome will be recognized within the network. When DHCP is selected, the DHCP server will assign this value automatically.

Primary DNS

Enter IP address of DNS server that is provided by ISP.

Secondary DNS

If your ISP provides you an IP address secondary DNS, please set it here.

Username

Enter User name of the account (used only for PPPoE).

Password

Enter Password of the account (used only for PPPoE).

Click Apply to apply the setting changes or Reset to reset without saving the change.

22

Image 22

Contents User’s Manual EPN3600 Safety Notice About this documentTerms and Trademark SupportTable of Contents 2.3.2 Feature IntroductionEPN3600 Accessing the Camera Menu Default page of Camera MenuView Size Video StreamRecord ~ 10 Play Audio/Transmit Audio SnapshotPTZ Control PTZ Control Window EPN3600 Select Object Number button, Go button and Clear buttonAuto Tracking -ON/OFF Manual Control TriggerEvent signals Manual Control ResetStatus Display System Info Information2 Log System Info InformationUser Config Text SettingRecording/Snapshot Export Setting Date/Time Format Used in TextNetwork Network Setting- Network NetworkEPN3600 Ddns setting DdnsBandwidth Setting BandwidthSMTP/FTP Set SmtpSet FTP Set Network Alarm Network Alarm reserved for PowerConVideo Stream Setting Multi StreamingVideo Recording Setting CameraPosition Settings Set PresetAuto Mode Settings Set Auto TrackingHow to set Auto Tracking Start point 13 Video Camera -Auto Tracking WindowSet Pan/ Tilt Limits Set Pan Range16 Pan Range Setting Right Limit Setting Set Tilt Range17 Tilt Range Setting Down Limit Setting Clear Pan/ Clear Tilt Set tracking mask20 Tracking Mask Size Window EPN3600 EPN3600 Set Object Size 22 Set Object Size Max/Min frameAlso click Reset button to make options to default values How to set Auto Pan Set Auto PanEPN3600 Set Tour 24 Video Camera -Tour WindowSet Pattern 25 Video Camera -Pattern Window26 Video Camera -Set Pattern Recording Tour Seconds PTZ OSD Settings General Operation Guide of PTZ OSD SettingButton/ button Video Settings ExposureIris Mode Focus Mode 30 Video Settings Focus ModeDigital Zoom White BalanceBacklight 2.3.1.6 Day/Night34 PTZ Video Settings Day/Night Color NegativeWide Dynamic Range 2.3.2 OSD/AREASAreas 40 OSD/AREAS menu- Areas Sub-menu41 Areas setting Left Position Setting Window 43 Areas setting DirectionsSet North Default NorthDisplay Show OSD Zones How to set private zone Private ZonesTo adjust the size of private zone, use following buttons Info 53 Private Zone Zone ColorAudio ExitAudio 56 AudioUser 57 UserEvent ScheduleEvent Press Button to add an event conditionExample 1 Manual trigger-Upload to FTP Example 2 Alarm input Go to PTZ Preset with Auto-Tracking EPN3600 Motion 59 Event Event TabAlarm 60 Event Alarm TabTime Mask 61 Event Time MaskSystem Date/TimeEPN3600 Daylight Saving 63 System Daylight SavingMaintenance 64 System MaintenanceEPN3600 65 EKB200 setting EKB20066 EKB200 Panel EPN3600 Specifications Audio Network / Interface EverFocus