EverFocus EQ600 WDII instruction manual Save/Restore, III. Restoer Factory Settings

Page 19

MENU

8. SAVE/RESTORE

EWD600 MAIN MENU				SAVE/RESTORE
PRESETMODE		INDOOR…		> RESTORE USER SETTINGS..
CAMERA ID		OFF		SAVE USER SETTINGS..
				RESTORE FACTORY SETTINGS..
ADVANCED SETUP…
				RESET CAMERA..

> SAVE/RESTORE…
				MENU REV.	0.1
EXIT MENU
				PREVIOUS PAGE…

I. RESTOER USER SETTINGS

Restore the previous user settings from memory. Press SET button to restore user setting.

II. SAVE USER SETTINGS

Save USER SETTINGS into the camera memory. Press SET button to save user setting.

III. RESTOER FACTORY SETTINGS

Restore the default setting. Press SET button to restore factory setting. Please refer to the Appendix-B for the default factory settings.

IV. RESET CAMERA

Restart the camera again. Press SET button to reset camera.

VI.MENU REV.0.1

Display the software version.

Note: The number will change by every time of the software change it’s not keep as this manual.

17

Image 19

Contents EQ600 Wdii Never face the camera toward the sun Safety WarningRead manual carefully before installing the unit CleaningTable of Contents Product Overview 1Main Features2Content List Product OverviewSpecifications SpecificationsBack panel connections Back Panel ConnectionsOperation Camera Setup OperationsPress the SET button for 2 second Display/Close the user setup menu screenII. Using the cursor button III. Switch to sub-menu screensMain Menu Flow Menu FlowUser Setup Menu Flow Preset ModeII. Slow Shutter User SetupPage ExCAMERA ID EverFocus101 Camera IDID Background ID ColorAuto Iris Advanced SetupWhite Balance 4VIEWING 3LINELOCKNormalMirror III. Restoer Factory Settings SAVE/RESTORECamera ID Character patterns Appendix-ACamera ID Factory Settings Chart Preset ModeAdvanced Setup Appendix-BUSA Office Beijing Office Head OfficeGermany Office Japan Office