1.Please direct the arrow to point to “BLC” by using the UP and DOWN buttons.
2.Select the HSBLC mode by pressing the LEFT or RIGHT button. Then make adjustments as below:
LEVEL | Adjust the sensitivity level for HSBLC from 0 to 8. |
DEFAULT | Set the factory default values for HSBLC. |
LEFT/RIGHT | Set the Left/Right side of an area for the HSBLC to be adjusted. The value |
| adjustable is 0~6. |
WIDTH | Set the width of an area for the HSBLC to be adjusted. The value adjustable is |
| 0~6. |
TOP/BOTTOM | Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value |
| adjustable is 0~6. |
HEIGHT | Set the height of an area for the HSBLC to be adjusted. The value adjustable |
| is 0~6. |
RETURN | Press “RET” to save all settings in the HSBLC menu and return to the previous |
| menu. |
| Press “END” to save all the menu settings and exit. |
3.3.3.5 |
|
When there are both bright and dark areas in the field of view at same time, this function can help to even the exposure between these areas.
1.Please direct the arrow to point to
2.Select the mode you would like to operate by moving the joystick LEFT or RIGHT.
OFF | Disables |
INDOOR Select this option if you are in an indoor environment.
OUTDOOR Select this option if you are in an outdoor environment.
RETURN Press “RET” to save all settings in the Exposure menu and return to the previous menu.
Press “END” to save all the menu settings and exit.
30