Color ADJ, Sync | EverFocus EQ550 guide

6.8.2 COLOR ADJ

Adjust the Color Gain from 0 ~ 15

SPECIAL
CAMERA ID		OFF		COLOR GAIN.
> COLOR ADJ.	<┘	INT	> LEVEL	++++++++ 8
SYNC.		INT	> LEVEL	++++++++ 8
MOTIION DET		OFF
PRIVACY		OFF
MIRROR		OFF
SHARPNESS		ON <┘
RESET
RETURN <┘

6.8.3 SYNC

There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it synchronizes the video signal between cameras. The Line-Lock synchronization is only used in the places of 60Hz (NTSC models) or 50Hz (PAL models).

-INT: Internal synchronization

-LL: External line-lock synchronization

=> If you choose “LL”, you can adjust the phase your wish to set. Then press the SET button. You can adjust the phase you wish to set from 0 to 359.

	SPECIAL
CAMERA ID		OFF		SYNC
COLOR ADJ. <┘		LL <┘
> SYNC.		LL <┘	> PHASE	++++++++ 0
MOTIION DET		OFF
PRIVACY		OFF
MIRROR		OFF
SHARPNESS		ON <┘
RESET
RETURN <┘

6.8.4 MOTION DETECTION

Polestar enables you to observe movements of objects in 4 different places on the screen, the message “MOTION DETECTED” appears on the screen when movement is detected; therefore this helps to improve supervision efficiency. The camera detects an object’s movement by sensing discrepancy of outline.

1)Please direct the arrow to point to “MOTION DET” by using the UP or DOWN button.

2)Select “ON” by pressing the LEFT or RIGHT button.

3)Press SETUP button.

- 18 -