6.8.5 PRIVACY
This mode covers the areas you do not want to see on the screen.
1)Please direct the arrow to point to “PRIVACY” by using the UP or DOWN button.
2)Select “ON” by pressing the LEFT or RIGHT button.
3)Press SETUP button.
| SPECIAL |
| PRIVACY |
|
|
|
|
| |
CAMERA ID | OFF | > AEREA SEL | AREA1 | |
COLOR ADJ. <┘ |
| |||
SYNC. | INT | AREA STATE. | OFF | |
MOTIION DET | OFF | AREA TONE | +++++++++ 80 | |
> PRIVACY |
| ON <┘ | TOP | ++++++++ 10 |
MIRROR |
| OFF | DOWN | +++++++++ 25 |
SHARPNESS | ON <┘ | LEFT | +++++++++ 20 | |
RESET |
| RIGHT | +++++++++ 40 | |
RETURN <┘
zPlease select the area you would like to cover from the 4 areas in AREA SEL mode.
zPlease select ON mode for the chosen area.
zPlease select AREA TONE for cover area. The larger the number, the lighter the cover area.
zPlease use the UP or DOWN button to move between TOP, DOWN, LEFT and RIGHT for adjusting the size of the area to be covered.
zPlease use the LEFT or RIGHT button to adjust the value for size of the area to be covered.
AREA1
AREA2
AREA3
AREA4
zAdditionally, it is possible to change the position of the area to be covered. Please refer to the following example for detailed steps on moving AREA1 to center.
- 21 -