EverFocus EQ550 specifications AREA1

Page 23

1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40.

AREA1

2.Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10, DOWN: 45,

LEFT: 20 and RIGHT: 40.

3.Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45,

LEFT: 20 and RIGHT: 40.

4.Increase RIGHT scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45,

LEFT: 20 and RIGHT: 60.

- 22 -

Image 23

Contents Everfocus PrecautionsTable of Contents Content List Product Overview Main FeaturesTop/Bottom Names and Functions of Parts 2.1 Front panelRS-485 port Power Input TerminalVideo Output Connector Back panel connections11 LED External sensor connectorAuto Iris Lens Connector For Day/Night model without ICR EQ550DInstallation Connection Setup Buttons Camera Setup OperationsDisplay/Close the user setup menu screen Shutter User Setup 6.1 LensSetup Brightness Lens Manual White Balance control AGC Auto Gain Control BacklightSENS-UP DNR Dynamic Noise ReductionSpecial Camera ID Sync Color ADJAREA1 AREA2 AREA3 AREA4 AREA1 Privacy AREA1 Sharpness MirrorReturn ResetExit Black How to set RS485 ID & Baud rate? Key Features with RS485Control by keyboard Day/Night mode setting from keyboardTable of Day/Night switching level Day/Night control by external D/N signalTo control external D/N signal Alarm output for motion detected 12VDC/24VAC SpecificationsContent List EverFocus Electronics Corp