First Alert K5309-5V2 manual KHFNLQJRU2SHQ=RQHV, To turn the Voice Status feature on/off #

&KHFNLQJ￿)RU￿2SHQ￿=RQHV￿

8VLQJ￿WKH￿>∗@￿.H\

Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed, otherwise the keypad will display a "Not Ready" message.

Use the READY key to display all faulted zones, making it easier for you to identify and secure any open zone.

1.Press [∗] (do not enter code first) to display faulted zones.

2.Secure or bypass the zones displayed.

3.The keypad’s READY indicator lights when all protection zones have been either closed or bypassed.

4.Arm the system as desired.

Alpha(-7%61)(Display:￿46)77

837,3;*%9087∗

Fixed-Word Display:

Zone no. and “NOT READY”

Voice Status: Voice Keypads (if installed), can announce system status and faulted zones (up to 3 zone descriptors) if the Voice Status feature is turned on.

To turn the Voice Status feature on/off: #

(also turns on Voice Chime mode; see Chime mode section)

+ 0 + 2 + 4

To announce Status: Press [#] FUNCTION + [0] VOICE + [∗] STATUS key. (Announces current system status; e.g., “Disarmed Ready to Arm.”)

To announce faults: Press [#] FUNCTION + [0] VOICE + [∗] STATUS + [∗] again within 5 seconds of the first press. (Announces up to three faulted zones with their zone descriptors, if programmed.)

– 14 –